Fitting 2.2 AAN to CQ with stock intake manifold

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kristjanr
    S2Forum Tinkerer
    • Nov 2026
    • 4
    • Country: Estonia

    #1

    Fitting 2.2 AAN to CQ with stock intake manifold


    Hi everyone,

    I’m currently planning an AAN swap into my Audi Coupe Quattro and looking into different options for the intake and cooling setup.

    I have a stock S6 AAN engine and see three possible routes:
    1. S2 over-engine setup – Requires quite a few original ABY/3B parts, so I’m not particularly interested in this route.
    2. Wagner intake manifold – A nice solution, but quite expensive.
    3. Pogo 70mm low radiator setup – This is the option I’m most interested in, as it allows me to retain the original AAN intake manifold.
    https://pogo-performance.de/en/gen3-radiator-aluminum-audi-rs2-s2-b4-70-mm-893-121-251-s-and-g-7a-140.html

    What are your thoughts on the third option?

    The car will be mainly used for street driving with the stock turbo, aiming for around 280–300 hp eventually.

    Would the Pogo low radiator setup be sufficient for this kind of use? Are there any potential drawbacks worth considering?

    Even if I added an auxiliary radiator, the total cost would still be roughly half the price of the Wagner setup. Another advantage of keeping the original AAN intake manifold is that I could retain the factory vacuum-operated cruise control, since there would be no need to relocate the throttle body.

    I’d be interested to hear your thoughts.

    Thanks!

    Screenshot%202025-04-06%20005108.pngimage.jpg
    Attached Files
  • Crasher
    S2Forum Enthusiast
    • Nov 2018
    • 163
    • Country: England

    #2
    A chap called David Harrison fitted a 20v turbo to a type 85 CQ we painted 20 years ago, I don’t know if he is on here.

    Comment

    • grundey
      S2Forum Enthusiast
      • Aug 2005
      • 126
      • Country: Latvia

      #3
      Hi,
      Another option worth considering is the setup shown in the attached picture. This approach works on a B2 chassis too, though packaging the intercooler gets tight if you want to retain the stock front-end appearance.

      Attached Files
      Team RS
      Grundey Intake

      Comment

      Working...