IM idea

[Azman]

Hi guys

Had some spare time at work tonight which got me thinking of a few bits. You know the collector on the EM could the principle be reversed for the intake manifold????
Therefore creating a tbulor intake with sort runners all the same length. Would this create flow problems or possibly improve things???

Az

[Azman]

No thoughts on this peeps?

[kwlw]

Hi guys

Had some spare time at work tonight which got me thinking of a few bits. You know the collector on the EM could the principle be reversed for the intake manifold????
Therefore creating a tbulor intake with sort runners all the same length. Would this create flow problems or possibly improve things???

Az

You won't invent bike with that. Some sort of receiver is needed for IM (even with intercooler) for low rpm response. Carefully seleced long runners are good for "standing intake wave" - thus for optimization at certain rpm (usually for the top end).


Sau

[Azman]

Why is a reciever needed??? (take it you mean like a volume of air i.e pipe/air collector). Surely due to the nature of the beast air flows to all areas where there is none. therefore using a colector to pipes should be usable especially under pressure. (scuse me not sat in a physics lab for a while).
Az

[Acidburn]

The inlet manifold looks like the same sort of design as whats currently on volcanors's shorty from what I saw at the weekend.

650ps? it looks like its still running a single coil, if it was wonder how they did that without it breaking down or missing

[terrybullwon]

The inlet manifold looks like the same sort of design as whats currently on volcanors's shorty from what I saw at the weekend.

650ps? it looks like its still running a single coil, if it was wonder how they did that without it breaking down or missing

Dizzy from the S1 is used by martinson at some thing like 800whp

http://www.martinssonracing.se/

[Acidburn]

So I could possibly keep to the dizzy instead of swapping over?