Tial WG - Good replacement for OEM WG?

[AndersS2]

Been thinking about the 44mm Tial WG and if it is a safe upgrade to the oem audi WG.
Anyone on here got some experience with it?

cheers,

[topsparky]

hi anders
i was looking at these the other day
be good to see what other members
think
iirc doug has a bigger wastegate on
his set up

[AndersS2]

Yeah,
I think they look like proper engineporn, but I would like to know if they perform as good as they looks?!
Heard alot about boost spikes on the oem WG and other scary trashed engine stories, and now I would like to protect my build as much as I can do... on the parts side.

[terrybullwon]

hi anders
i was looking at these the other day
be good to see what other members
think
iirc doug has a bigger wastegate on
his set up

I have a 50mm HKS gate iirc doug has the same, If i was to buy again i would buy a tail sport or turbo smart one with the V-band fittings

[AndersS2]

Got naymore info on the tail sport?

[terrybullwon]

Got naymore info on the tail sport?

Anders have a look here

https://www.tialsport.com

[AndersS2]

Very good!

thanks James

[GazzaG60]

do you need 44mm on less than a big turbo big boost setup.

[terrybullwon]

do you need 44mm on less than a big turbo big boost setup.

A big factor to consider is the size of your down pipe, I am going 50mm with a 4" down pipe

[GazzaG60]

i understand that cos youll need it with the turbo and boost level but too big a gate can cause fluctuations in boost etc.

personnally on anthing over standard id open dump but i can see your reaoning with the alomost 2 inch into the 4.

are you running a fairly small hotside?

[terrybullwon]

i understand that cos youll need it with the turbo and boost level but too big a gate can cause fluctuations in boost etc.

personnally on anthing over standard id open dump but i can see your reaoning with the alomost 2 inch into the 4.

are you running a fairly small hotside?

Hot side is 0.82 but i also have a smaller one, i was told of a IL5 in france making 592hp on a GT35/40r with a 0.62

I am on a toss up atm with a bov or two recirc?

Sorry for the high Jack anders

[RustyNut]

Reading on the 034 site they recommend the 44mm WG for cars running a 500+ set-up to avoid boost spikes etc but what about cars with around 450ish? Is it advisable to upgrade the standard WG with this set-up? Presumably it is and makes it easier to remap also? But which one?
Apologies also for sharing your thread Anders .

[AndersS2]

Apologies also for sharing your thread Anders .

No problem as this is what something I'd like to know too

[terrybullwon]

Anders did you get one in the end mate?

[AndersS2]

Yes, but it yet to be mounted. Looks like a serious bit of kit.
Love the quality and how professionaly boxed it is.

thinking of buying one James?