New exhaust time

[audiman]

Right, the friend of mine that created the exhaust on my car owes me some favours. Time to pull them in.

What i am gonna have made is 3" downpipe, with seperate wastegate pipe vented to the floor.

Unsure about what else to do with the system, ie exit out the bumper or from just infront of the rear wheels on both sides? Is that a bit barry boys?

Does look good on the Dialynx car, just not sure about an S2. There is room under the floor for a silencer each side. I may just stick with a rear exit pipe and just use 3" tubing.


Any thoughts or piss taking please

[Doug_RS2]

Get the tubular EM first, then you won't need to change the DP again to fit that.

[audiman]

Mmmm, i thought about that, but its not costing me anything for this, just the Stainless. So the downpipe can be modded at a later date.

What sort of exit do you think. The side exit does look good. But im worried about piss taking for being a little boy racer!

2 x 2.5" slash cut pipes for the tail pipe. But coming out from where?

[S2 Ant]

As i said on MSN... oval either side in rear bumper.... RS6 style, subtle then too

[APNess]

Are side exit pipes legal? Why don't you have one coming out the bonnet instead - with all the white smoke your car put out last time I saw it people will think it's Steam powered.

Happy to help

PJ

[Doug_RS2]

I was thinking about the side exit - you might need a very flat oval length so you still have some decent ground clearance - would you be able to drive over speed bumps with a 2.5" pipe under the middle of the car?

What about straight out the bonnet - would that be loud enough for you?

[Doug_RS2]

Great minds think alike Paul

[S2 Ant]

Steam Power

[audiman]

Not sure about the side exit thing. It is legal, but as doug said, ground clearance may be an issue. Also the fuel pipes are located under the floor on the drivers side. SS conducts heat very well. Would have to make a heatsheild for the fuel pipes. Mmmmm. I will post some pics of outlets in different places.

Bonnet exit sounds great. Ill just glue on a Impreza scoop and put the pipes out of there. In fact, im gonna get that manifold made so the turbo is above the bonnet, that will keep EGT's down and also allow loads of cool air in the turbo. Result. cheers Paul. Pr**k!!!

LMAO

[Greg_S]

Originally posted by audiman
Mmmm, i thought about that, but its not costing me anything for this, just the Stainless. So the downpipe can be modded at a later date.

What sort of exit do you think. The side exit does look good. But im worried about piss taking for being a little boy racer!

2 x 2.5" slash cut pipes for the tail pipe. But coming out from where?

Tom, I will take a few pictures of my exhaust for you because i had twin 2.5" tail's put on mine at prism motorsport.

Will try get some pictures this week for you.

Greg

[martinjs]

Here you go tom, could team bodge make one of these

[horvathg]

A tasty solution this chimney is. Suits the brand pefectly. A turbine engine this may be?
Tom, I dont know what the British people think about recent Audi backs, however, I fancy these double exhaust outlets like all cars with more that 100 Kw power have. I would do this if there was a team to weld the system.

[APNess]

Friend of mine had a back box like that for his ford onion. I mean Orion. It didn't sound beefy tho - souded really tinny and like an echo. VROOM vroom... vroom... vroom etc

[S2 Ant]

LMAO @ That pic!!!!

Team Bodge should blatently just get some ****ter to do this kinda thing on.... oh no wait, we've got Tom's S2 already for that

[Jeffer]

@ Tom,

I'm going for the "in front of rear wheel" setup. custom downpipe 3" one silencer in the area where the cat's were. and then a nice 3" pipe to the side with a slash cut.