I need to find some of them 'chain reinforced' exhaust hangers for my back box and i'm having way too much trouble locating them...
Anyone know a uk supplier?
Anyone know a uk supplier?
-
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk -
I know thw power flex are chain reinforced as i put them on my MK2 Golf
Just some finishing touches to do now -
Ah well see...
Had a little problem with the PF ones i tried...
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
mate... put them more away from the pipe!!! I'm almost sure that is your problem!!!- Looking for a S2
- Lancia Dedra HF turbo i.e. (4sale)
- Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )
sigpicComment
-
The brackets look very short on the exhaust? Mine have a good clearance from the exhaust, but i can see your problem. Good luck finding something that your not going to burn through in a month.Just some finishing touches to do nowComment
-
Could put some protection on the powerflex one's like a grommet inside or inbetween it, halfrauds one's no good then?Comment
-
PM Aelred, thats where I got mine from, once they are on that exhaust will not move........as I say, once they are one
sigpic
1992 3b S2 CoupeComment
-
Got a set for my golf years ago from C&R Enterprises in Nottingham- website seems to be shut down but the tel is:0115 978 5740
They were the original type rubber mounts but with chain reinforcements.
Still on the car now 5+ yrs later
HTHComment
-
Cheers guys...
the oem ones just dont seem to last but dont melt, the PF ones just didn't like being up close.
I'll give Aelred and Steve a ring in the week.
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
if you manage to get some from Aelred Jamo, can you let me know? I had the exhaust off recently to de-cat and mine still owrked fine but the rubber was cracking a fair bit. I seem to remember 4 were about £20 delivered.sigpic
1992 3b S2 CoupeComment
-
As stated,
C & R Enterprises. My recollection is that there are OEM for car with Cats in USA?, but anyway C & R - Steve Creswell.
HTH.
Kind regards.Comment
-
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Got mine from C&R and still on 10 years later. Not cheap but if they last as long as mine they are worth it.1986 Coupe q - 2281cc 3B, chargecooler, 2.75" exh & downpipe, ported head, water injection, CGR box, modified MD357 turbo, 440cc injectors, high power coil.
2004 A4 2.5TDi convertible, re-mapped to 180bhp
2011 A5 sportback 3TDi-Backbox delete, remapComment
-
Anybody got any idea where i can get chain reinforced exhaust hangers, my stainless backbox needs normal rubber ones more often than i change my grits...
Black B3 1990 CQ 2.3E converted to ABY & 6spd. (301bhp) - Now Sold
03 Dolphin B6 S4 Avant LPG - New Daily Wagon
01 Silver D2 A8 3.7 quattro sport - SOLD
"Difficult is worth doing"Comment
Comment