Help pls - Cant undo the 3 x nuts centre bottom RS2 EM ..

[s2bug]

How very bloody annoying ...

Gone to take RS2 EM off my 3b ..

Down pipe off
Turbo Out
All nuts undone on EM accept this 3 Mo Fo`s centre bottom

The only thing I can think of is to cut a spanner down to a shorty..

So before i start going mental etc would be very grateful for top tips as to how to remove these mo fo`s ..

Cheers all

[UrS4boy]

IIRC, you need to grind a cheap wrench down (thinner) to get in there. If removal is the opposite of installation then these *might* help:

http://forums.audiworld.com/s4s6/msgs/244055.phtml and

http://forums.audiworld.com/s4s6/msgs/150087.phtml and

http://forums.audiworld.com/s4s6/msgs/150088.phtml and

http://forums.audiworld.com/s4s6/msgs/12689.phtml

[s2bug]

IIRC, you need to grind a cheap wrench down (thinner) to get in there. If removal is the opposite of installation then these *might* help:

http://forums.audiworld.com/s4s6/msgs/244055.phtml and

http://forums.audiworld.com/s4s6/msgs/150087.phtml and

http://forums.audiworld.com/s4s6/msgs/150088.phtml and

http://forums.audiworld.com/s4s6/msgs/12689.phtml

Many thanks

Looks like thats the only way in... gotta love Audi sometimes

[Fat Audi 80]

Yep. agreed. There is a trick to that one, which includes modifying / destroying tools!

best of luck.

Cheers,

Steve.

[lind4hl]

i did this a week ago. it ended with taking the head off, easiest for me, and when the head is gone you can also port and polish it at the same time