Hose clips

[Azman]

Morning folks,


In the interest of being prepared for Samco delivery I am going to get a full set of clamps for them as a few look like I will be breaking them off.

So in there interest of science and for those that may be wanting to do the same can anyone list the sizes of clamps that are needed for the Boost kit and also the water Kit.

IIRC there are 17 needed for the bost kit alone and as trying to go for decent clamps instead of the usual jubbies I have been having a hunt and found this on fleabay.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=140278461801

So can someone list the full set and sizes.

List below is where the clamps should go just after the sizes dudes.

1. Maf - turbo (maf end)
2. Maf - turbo (turbo end)
3. Dumpvalve x2
4. Breather pipe into maf -turbo pipe
5. turbo to cooler (turbo end)
6. Turbo to cooler (cooler end)
7. Mark H mod (2 needed)
8. cooler to top pipe (cooler end)
9. Cooler to top pipe (top end)
10. TB pipe (small end)
11. TB pipe (large end)
12. ISV valve x4 (IIRC)

Correct me if i am wrong on any or there are more that are needed guys please.
would like to be ready so the day they land they can be on the car and fingers crossed go for a good stutter free

Cheers

Aaron

[Azman]

Just thought this may be worth making a sticky if the water set sizes are added too for those who want to do a complete clamp change or preorder before their Samco batch arrives.

Cheers

[Azman]

Anyone?

[K Simmonds]

They do look good, I'm quite tempted to use them when I finally get some silicon hoses.

[PeteRR]

Here's a list of hose clip sizes for the boost and water hoses that baltiboyS2 kindly provided me with a few months back:

4x 68-73mm
2x 55-59mm
3x 34-37mm
5x 31-34mm
2x 25-27mm
1x 85-91mm
9x 27-29mm
1x 23-25mm
1x 37-40mm
1x 79-85mm
1x 43-47mm
2x 40-43mm

I think these are Mikalor sizes. I was going to use J.C.S. 'Hi-Grip' clips in stainless steel myself, which are the very ones Samco provide in their clips kits I believe.
(I presume that 3B and ABY/ADU would use the same size clips?)

[Azman]

Cheers sir

[Jamo]

Here's a list of hose clip sizes for the boost and water hoses that baltiboyS2 kindly provided me with a few months back:

4x 68-73mm
2x 55-59mm
3x 34-37mm
5x 31-34mm
2x 25-27mm
1x 85-91mm
9x 27-29mm
1x 23-25mm
1x 37-40mm
1x 79-85mm
1x 43-47mm
2x 40-43mm

I think these are Mikalor sizes. I was going to use J.C.S. 'Hi-Grip' clips in stainless steel myself, which are the very ones Samco provide in their clips kits I believe.
(I presume that 3B and ABY/ADU would use the same size clips?)

Looking but can't find a breakdown of hose clip sizes to the actual relevant part on the car.
Azman did you manage to cross reference the list of sizes to your list above?

[baltiboyS2]

Hi Jamo the sizes above are for mikalor clips only as the size difference is fully open to fully closed
the hose were somewere in bewteen as you know when you put a hose onto a metal fitting the size increase's hence the large gap bewteen the open and closed size

cheers Raj

[Jamo]

Hi Jamo the sizes above are for mikalor clips only as the size difference is fully open to fully closed
the hose were somewere in bewteen as you know when you put a hose onto a metal fitting the size increase's hence the large gap bewteen the open and closed size

cheers Raj

I want Mikalor clips!

[baltiboyS2]

I think i have a copy of which is which have you got the hoses just measure them unless there on the car already
If not i will measure the hose's up tomorrow i will just do the boost as there is less of them you can just discount them from the list

cheers Raj

[Jamo]

I need a different amount of clips due to the custom nature of my setup, I didn't know you were still doing them!

PM mate

[baltiboyS2]

I can still get them no one showed much interest at the time so i never bothered doing a second group buy i could organise another but i would imagine the price has gone up a bit not much though

cheers Raj

[Jamo]

I'll measure up and PM you it's only different in a couple of places but I'll need a different amount of clips

[europeanme]

I can still get them no one showed much interest at the time so i never bothered doing a second group buy i could organise another but i would imagine the price has gone up a bit not much though

cheers Raj

Hi Raj,

i'd be interested in a 2nd GB as my boost system is leaking like an old flatulent dog!!

[vonbeck]

Hi Raj,

i'd be interested in a 2nd GB as my boost system is leaking like an old flatulent dog!!

me too