3b inlet cam

[denniselbows]

would any one have a 3b inlet cam to hand and be able to post some pics of the dizzy drive gear. a friend of mine has been changing some cames on their rally car and has said to me that i could fit a rs2 inlet came to my 3b as the dizzy drive gear is pressed on to the cam and not machined on. i had all ways thought it was just a machined part of the cam. not wanting to take my engine apart to check could someone comfirm if this is correct or not .


thanks dennis

[Flat on my back]

.

Its pressed on, i have a 7A to hand if piccies still required?

[K Simmonds]

I thought the RS2 inlet cam has the same profile as both ABY and 3B inlet cams.

[Flat on my back]

.

I believe it has the same basic spec, eg lift, opening and closing times but as yet a 'profile'...lift versus degrees is not known on these cams.

Unless you have some?

[Acidburn]

afaik biggest difference is the cam gear is not present from what i know.

hence why i've been keeping an eye out for a 3b inlet cam.

[Jamo]

Cams are the same, check the part numbers