Intake and intercooler

[vcosmin]

I want some opinions about furans intake manifold (dual plenum, 80mm tb), how good it flows ? , i think that there are some users on this forum ? And a good FM intercooler, i saw that there are many shapes, and brands, which will flow about 1200cfm, with good randament. And one more question it is about E85, and dry ice, - will the lower intake temperature cause problems, using in combination with E85 ? thanks.

[vcosmin]

No one using it ? i need some feedback, it is about 800E

[Masterblaster]

The Special intake work and flows much better than the pure race 80mm im.
This statement was given from the owner of Furans last week on the phone...
I dont have exact numbers sorry....

[vcosmin]

Thanks, i will speak with him, to see what is good for me, also about dual rail / dual injector.

[quattro84]

Jonus makes almost 1300hp with his Furans IM.
1300 V.S. Motor hp's though, don't know how much that is in ISO/DIN hp

[Masterblaster]

Try to get this one.....

[vcosmin]

Ok, just to make things more dificult i have to choose betwen this 2

Furanse - dual plenum pure race .
And Eklunds Intake - ITB
I might run, later on - a nos (fogger ? on each intake runner), and the turbo ist gtk650

Diferrence in price aroun 30% more for the ITB setup . So should i make a poll ?

[Jamo]

Have you considered a Pro-Mo manifold? i.e from Repo?

[Masterblaster]

I am also running on a GTK 650 in my UrS4..
I ordered the Furans.
Should be good for 750 HP!!!and more
KRB also offers a good solution good for 1000HP
The price is around 1000 euro+shipping.

cheers
Kai

[fish]

Have you considered a www.cp-service.se intake?? It´s proven to 806whp maybe more now. I don´t know if he has any pics in his webshop of it though.

[vcosmin]

Have you considered a Pro-Mo manifold? i.e from Repo?

Yes, problem is that is a liitle diificult to fit secondary injector, and is the most expensive choice. Also i think it is not place, for an eventually nos nozzle.

[vcosmin]

And one more problem, it is that very few, if any have a flow chart, or something to see how much of restriction are, there are so many, shapes, makers, etc, it is hard to have a good choice.

[Jamo]

The pro-mo one does, on request only though I believe, the furans one would be best for you then.

Jonus used it to 1400 bhp with nitrous however they did not use dual plenum they used single plenum.

[yavor20v]

950hp , 2.5bar boost

....

.....

.....

about 600-650 euro here in Bulgaria
if you want one, pm me
p.s. the throttle is from Nissan Infinity

[vcosmin]

Thanks, but i already ordered a dual injector, furans modified one.