see pics
been offered this, its audi but not sure which make or how good
been offered this, its audi but not sure which make or how good
-
-
it looks like one of those ebay things? -
Quality is good, needs to be well supported tho as it WILL crack, had to weld one up a couple of times because it wasn't supported very well
Cheers
Will
Comment
-
Quality is good for the price they are anywayComment
-
how much should i offer then? is the fit/sizes ok if not the finish?
i only want it as a pattern for my fabricator to make upComment
-
speaking of fabrication
anyone want any ally/tig welded stuff making up let me know
can do intercoolers etc but expensive until we find a better core supplierComment
-
Won't fit a 10v iirc. Who are u using for your profiles? Give me a call I can laser cut mild steel & stainless.
07976299409
WillComment
-
The manifold flange looks to be poor, it has no room for thermal expansion. It will crack it's self and or snap or bend the exhaust studs. Cps Sells flanges iirc and guessing that's what you need?ChefComment
-
Not that that fails, the welds on the tubes crackComment
-
this manifold is crap!
wabtheking, my mates cracked first at Wg tube, then strenghten that up, it cracked again..
the dp had an flexbellow.
those manifolds aint worth the moneyLast edited by lind4hl; 12 December 2009, 17:49.
One thing i've learned we are way behind the Scandinavians!Comment
-
but as an pattern they are pretty good..
One thing i've learned we are way behind the Scandinavians!Comment
-
Stolen pic from internet,
One thing i've learned we are way behind the Scandinavians!Comment
Comment