RS2 Exhaust

[dave944s]

Hi

I posted on RS246 a question about the JETEX Exhaust from C&R cat back and was pointed here as they suggest the Miltek system, I live in Scotland so I want one I can almost take out the box and fit straight on, the Jetex is cheaper than the Miltek systems I have seen advertised, all help greatly appreciated.

Dave S

[GazzaG60]

lots love the miltek. im not a big fan much prefering custom made ones. they alwasy fit better.

my choice of off the shelf is usually supersprint.

[Jamo]

Milltek boxes sound like no other, mine is RS2 3" Milltek back and middle box then custom 3" turbo back by Pipewerx

Best of both worlds as it make sure it fits properly as Millteks normally need fideling to fit to get the pipes at the back correct.

Not a fan of Jetex in anyway shape or form.

Either go full custom or do what i've done

[Rusty]

Milltek should fit like OE, as above, they sound nice and do a decent job. If you don't have any specific requirement then get one, if there's something you specifically want then a custom system is the way forwards (like a 3" DP for example).

[GazzaG60]

not sure of the box types on mine.

itd not the quietest car in the world. in fact its far from it. it pops and farts on over run and screams like a ****er the rest of the time.

[dave944s]

Hi People

Looks like Miltek then, next question, where is the best place to get one, anyone out there who you can trust to help you should god forbid you need help or if you have a problem, can you buy just the middle section or do you have to get the whole cat back system.

Dave S

[Jamo]

Milltek should fit like OE, as above, they sound nice and do a decent job. If you don't have any specific requirement then get one, if there's something you specifically want then a custom system is the way forwards (like a 3" DP for example).

They don't the tail pipes stick out on the Avants / RS2 with the cat back pipes as the system wants to push back.

Some cars it will fit fine, most need a bit cut out of the pipe coming from the centre box to allow the back box to come further in from the bumper.

[PaulJ]

Hi

I've a milltek on my RS2, stay just outside Falkirk

Mine fitted OK from Cat back, not too noisy, sits a bit low behind middle box but why do half the job, 3" downpipe and a flexi built in somewhere will help protect turbo
and manifold if you happen to hit the exhaust on our crap scottish roads

You were not at crail last weekend were you ?

Paul