inlet manifold gasket AAN?

[byd1380]

Just bought a S6 (Posted in Newbie and members cars) anyway, car is missing, holding back, so was checking for boost leaks. Founf the pipe from N75 to wastgate cracked, did a pressure check and found a leak on the rear of the inlet manifold, around the bolts on the last flange, where the mount for lifting the engine is.

So, just after a bit of info:

Anyone know what the Part number for the inlet manifold gasket is?
What length of 6mm allen key do I need to remove it? would a long T-bar allen key do?

Cheers

Ivan

[s2_wot]

034 129 717 K is the gasket

[s2_bo]

Depends on the T bar fitting, if its to wide at the end it wont make the holes, theres a few threads coving what tools to buy. The audi tool is not necessary thats for sure. I got one of ebay that did the job nicely.

Its worth checking over all the other hoses too, as some may be leaking a bit of air.


Good luck.

[byd1380]

Yeah, I found a few suspect connection around hoses, will give it a good going over when the inlet manifold is off, ordered some long reach keys this morning.

Cheers

Ivan