Coupe Exhaust

[Robatron]

Hi guys.

Just a quick question. Is it possible that you can fit a powerflow, magnetic, scorpion, etc.. exhaust on a Standard 2.0litre coupe?

If it is possible I wouldnt mind one like shown below:



To me this perfectly complements the car. So what do you think guys?

Any help is much appreciated.
Rob

[mcandmar]

Quattro models have a different back box, but they seem to be the same for all type-89 quattros. i.e 90Q20V, CQ20V, and S2 all use the same back box AFAIK.

I would guess it would be the same as an Audi 80 or 90 (4 or 5cyl) non quattro. Possibly a V6 and soft top.

Hi guys.

Just a quick question. Is it possible that you can fit a powerflow, magnetic, scorpion, etc.. exhaust on a Standard 2.0litre coupe?

If it is possible I wouldnt mind one like shown below:



To me this perfectly complements the car. So what do you think guys?

Any help is much appreciated.
Rob

[Robatron]

Yeah that would be nice if it were the case, thank you .

I'll check it out. I know on the scorpion site it that says you can put these exhausts on the 4 cylinder 80's (atleast I think I read that), so hopefully they too should do them for 4 cylinder coupes.

I need me an s2

[porkkis]

16V, 20V, V6 and S2 share a bigger diameter exhaust as the other models (8v and 10v) use a smaller diameter.

[Boez]

This exhaust was already fitted when I bought the car (standard 2.0E) but looks like what you're after! Click for picture...

Boez

[Robatron]

Yeah it does indeed, that looks like the dogs-bow-locks to me.

Do you know what exhaust that is?

Also what does it sound like, I dont want something that blows your ears off, I want a nice sporty sound to it.

[Boez]

Not sure it'll have an manufacturers ident on it but I'll have a look tomorrow...

I guess it makes my pitifull ABK engine sound a little better but I dont think its much louder than a standard exhaust.

[Robatron]

Not sure it'll have an manufacturers ident on it but I'll have a look tomorrow...

I guess it makes my pitifull ABK engine sound a little better but I dont think its much louder than a standard exhaust.

One day we will own a 5-pot turbo, but hey, we all have to start somewhere.

Also is that just a backbox or is that a full system?

[Boez]

Also is that just a backbox or is that a full system?

Sorry couldnt see any manufacters mark and as I say it was on the car when I bought it.


I can tell you that its just a back box though.

HTH
Boez

[Robatron]

Ok. Thanks very much for your help boez. It is much appreciated.

I managed to get in contact with scorpion regarding a S/S System with the STW back box but he said £305 for the lot...That sounds pricey to me. Im not sure how much other people charge tbh with you.

Anyone have any idea of a cheaper alternative or where I can get one cheap?

Thanks

Rob

[mcandmar]

Try Paul Fern in Custom Auto Craft, i dont see it on his web site but he may have one..

http://homepage.internet.lu/customautocraft/cac_exhaust_sys.htm

I bought a back box from him and its really nice

£300 is that just the backbox or complete system? Last time i bought a scorpion system it was about £350 for a Honda CRX. My stock audi center section cost more than that so i wouldnt compain.

Mark.

Ok. Thanks very much for your help boez. It is much appreciated.

I managed to get in contact with scorpion regarding a S/S System with the STW back box but he said £305 for the lot...That sounds pricey to me. Im not sure how much other people charge tbh with you.

Anyone have any idea of a cheaper alternative or where I can get one cheap?

Thanks

Rob

[Boez]

Anyone have any idea of a cheaper alternative or where I can get one cheap?

There are threads on the Audifans.net forum talking about custom built powerflow systems for £380+vat(IIRC) with a life guarantee, so £305 sounds cheap!

Are scorpion systems custom built or prefabricated for a particuar model?

Boez

[Robatron]

Thanks guys, you have both been helpful. May have to bite the bullet and pay £305 or maybe I'll put this towards my s2 savings

They are premade to a particular model. But apparently scorpion are stopping this particular system very soon.

Rob

[rotoryboy]

Try Paul Fern in Custom Auto Craft,

Mark.

I'm currently talking with Paul Re: S2 Backbox. Looks good and he's an Audi Nut so it's all done properly (not just for money - the money helps him develop more products). If there is any interest give me a pm, it's looking around 190 Euros + p&p

[Robatron]

Hmmmm. I wonder if he does full system's for the 2.0 litre coupe.