Focus RS manifold on audi?

[Audi500HP]

http://www.ebay.de/itm/Ansauggehause...item53e9a01c7c

May be Ill try to install this in my ABY coupe as an option to the expensive Wagner intake manifold.

Also check this:

http://www.pumaspeed.co.uk/product-Sitech-Focus-RS-Mk2-High-Power-Cast-Alloy-Inlet-Manifold_914.jsp&pic=3

Ill need a copy of the audi intake manifold flange, then re route until the plenum with aluminium tubes.. I see some problems with the radiator location and the hydraulic pump.

What do you think?

Cheers
Fernando

[terrybullwon]

First one looks plastic?

[diesel des]

Port spacing is different. Been talked about many times..

[djh]

puma speed one - once you've messed getting it to fit it would probably work out same as a wagner one and could still have issue's.

2nd one (plastic one) if its high powered, how high?

[pasbogdan]

What is yout target of hp?I noticed the OE IM was used at high power cars.
Maybe someone more experienced in IM's can give us more light.

[ian4455]

Isn't the focus engine based on volvo and thats based on audi or something along those lines ?

[Billman]

Maybe a Fiat coupe 20v turbo would also fit.

[Acidburn]

anything can fit with enough time and money. It all depends how far you want to go, if your lucky and you've got the bits kicking around then its worth a shot. Easiest thing to do to try it out is get an inlet gasget as its cheap and see exactly how far its out from an s2 engine.

[andy10v]

Are you thinking of using the plastic one? How are you intending to join the runners to the manifold?

Would it not be easier to use an AAN manifold or modify one if on a budget?

[caterpillar]

focus= volvo 5 pot for sure !!!!!

[URquattroGus]

The plastic one is commonly replaced for a cast Mountune or Sitech version that cost about £630.

This gives quite substantial gains as the standard one isn't great, and it has even been known to split on some 400bhp plus cars.

Don't think it'll work.

[Avantus]

Correct, plastic ones crack.