Miltek Exhaust Questions

[Doug_RS2]

Is it 3" all the way back?

Does it have the y piece for the 2 cats on an ABY coupe? ( I don't want that)

How may boxes are in it?

How mucho does it cost?

I think I am going to sell my custom one as it is only 2.5" - it will include cat replacement pipes - and you get a good note out the back.

[Sidspud]

I've got a Miltek RS2 exhaust on my Avant, but its only 70mm or 2¾". Its from the cats back so has the Y piece and it only has 1 box at the rear.

IIRC it cost around £500 + VAT fitted. I got mine from Star Performance up your way.

[4WheelDrifter]

My local SS guy does a lot of Porsche stuff (top quality) and he done one for me, including de-cat for less then £450 inc VAT fitted. Any tail pipe you like. Even Audi ring design, if it’s to your taste. Maybe a bit far for you to travel, but to give u an idea.

[Greg_S]

4wheeldrifter, where is your man based? I want to have one of the boxes taken out of my system at some point and have its fit tweaked slightly and looking for somewhere to do it.

Greg

[4WheelDrifter]

Cullompton, Devon M5 J28.

[S2 Ant]

Sounds v interesting... im gonna need to get my zorst sorted in the near future (all being well) and at that price sounds like a gd deal!

[4WheelDrifter]

Top quality work. Welders like robots. They are always very very busy so I won’t post their name. One of the company directors is a neighbour. So any more enquiries, let me know and I’ll pass on any messages.

[The Spanish]

Doug.

Milltek full system is:

Downpipe. Single Cat then splits into 2 sections then again 2 into 1. Then center silencer and backbox. For the coupe is 2.5''

Very expensive and odd.

Try elsewhere for a turboback. For a Cat-back is ok.

Try this link for pics: http://www.s2forum.com/forum/showthr...lltek+downpipe

For more info. Milltek system for the Avant is the same than RS2 and it is 70mm so a bid wider. Downpipe and Cat are the same though.

Cheers,
Rafael

Is it 3" all the way back?

Does it have the y piece for the 2 cats on an ABY coupe? ( I don't want that)

How may boxes are in it?

How mucho does it cost?

I think I am going to sell my custom one as it is only 2.5" - it will include cat replacement pipes - and you get a good note out the back.

[sal_s2]

I've got the milltek on mine. Rafael is right, its 2.5" all the way with 3 silencers. It fits well and is only slightly louder than the standard exhaust.
The rs2/avant milltek is much better.

I'm going to sell my system in the next month or two and get a single box 3" system made, turbo back.
Anyone had any experience with Custom Chrome?

[Mark Halligan]

I'm going to sell my system in the next month or two and get a single box 3" system made, turbo back.

LOL, cant wait to hear that Sal

[sal_s2]

LOL, cant wait to hear that Sal

Me neither

Whereabouts are Prism?

[Habib]

Me neither

Whereabouts are Prism?

I got mine made from longlife not bad. 3" and a single silencer with side exit. cost me around £350.

[sal_s2]

I got mine made from longlife not bad. 3" and a single silencer with side exit. cost me around £350.

Will any Longlife retailer make a 3" system?

Did they make your downpipe aswell

[Mark Halligan]

Whereabouts are Prism?

Enfield North London, I was happy with my Downpipe from them but I think Greg has had a few probs with his full system.

[s2avant]

I'm going to sell my system in the next month or two and get a single box 3" system made, turbo back.
Anyone had any experience with Custom Chrome?

If you mean custom chrome in Nuneaton, I spoke to them a few weeks back about getting a 3" system built for mine. They reckon it would be about £550 for a downpipe back system (I've got a Marco downpipe waiting to be fitted).

They're only down the road but I haven't had a chance to go over and see them yet. I was looking at the supersprint setup but was recommended by a supersprint dealer to have custom chrome do it as the work was better

I'll let you know when I've got my **** in gear and sorted it. Need to get the next porsche brake upgrade on, 4 new tyres and hall sender changed first.

Ben