Audi Sport Quattro EVO Exhaust Manifold Query?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • macspring
    S2Forum Zealot
    • Mar 2005
    • 6371
    • Home: Ireland Current: Wallis & Futuna

    #1

    Audi Sport Quattro EVO Exhaust Manifold Query?



    Does this manifold fit an ABY car, and if so is it better than the Wagner RS2 Evo exhaust manifold ?

    Don’t fully understand the pro and cons of the two different styles.

    Thanks.
  • Error404
    Super Moderator
    • Mar 2007
    • 19789
    • Country: United Kingdom

    #2
    In a nutshell, SQ Evo outflows the RS2 Evo, but whereas the RS2 Evo is supposed to be a direct fit for the stock manifold, the SQ Evo is not, so downpipe etc must be modified to fit. Also IIRC the SQ Evo uses a T3 flange, whereas the RS2 Evo you can choose between a T3 or KKK flange
    Panthero Coupé quattro 20vt
    Indigo ABY coupé
    Imola B6 S4 Avant

    Comment

    • macspring
      S2Forum Zealot
      • Mar 2005
      • 6371
      • Home: Ireland Current: Wallis & Futuna

      #3
      Outflows it by much or just a bit ?

      Lots of modification or just a little bit to the downpipe ?

      Thanks for the initial explanation.

      Comment

      • Acidburn
        S2Forum Obsessed
        • Jun 2007
        • 13459
        • Country: United Kingdom

        #4
        From what i've seen quite a bit to the downpipe but all depends on what turbo.

        Are you going for max with your engine as I reckon personally that the rs2 evo will do for all that most will need.

        The rs2 evo one from what people have mentioned is around 5-6mm different to stock. When I helped ross put his engine in we found this, stuff still fitted fine but was a bit more effort to pull the downpipe/wastegate flanges onto everything.

        Comment

        • JP
          S2Forum Extremist
          • Mar 2007
          • 1858
          • Country: United Kingdom

          #5
          Well so far the rs2 evo is proven capable of 574ps. Personally I think the limit at this point has become the k26 hotside and stock wastegate. Although the manifold is probably not far of its limit in k26 form. T3 should go a bit further as the turbo flange aperture is larger.
          UrS6 Stroker + HTA3586 =

          Comment

          Working...