Where is the best location for LPG injectors

[s2_wot]

Converting an AAN engine in the near future to run on LPG, I have a spare inlet manifold that I would like to get drilled and tapped thus making the installation tend towards plug and play.

[prj]

Are you going to inject liquid or gaseous LPG?

[s2_wot]

I expect it will be gaseous, there isn't much experience with liquid phase injection here.

[prj]

For a stock car, a single 300hp rated atomizer and big injectors, which you will probably have to drill out.

If you want to be able to floor the car on LPG that is.

[s2_wot]

Totally pointless unless I can go flat out so I am researching a system that will work well.

Thanks for the tips.

With the LPG V8 how far from the petrol injector was the lpg injector located approximately?