Reverse Stock IM

[Billman]

So, i also make a question in the other thread but noone answered!

So my question is: Can this work well on an RS2 with the Water Rads and the Air Con in place??? Who made this? What other mods needs to be done??

Greetings

[4WheelDrifter]

It looks as if if they've used a front mounted radiator, like a V6 one maybe.

[Billman]

Yes, could something like this mod work on the S2/RS2 with the rads for water and clima in place!

i Think since you can adjust the path from the Throttle Body to the main IM then it would not be very difficult!

Does anyone has more pictures of this IM? where did they cut it ect ect

[Greg_S]

There would still be a fair amount of work involved since the runner all need to be cut off then re welded to the main body, a new flange made for the connecting pipe to go onto, modification of the original flange for connecting the TPS and also the ISV.

The PAS pump will more than likely need moving to make enough clearance to get the connecting pipe fitted also and the wiring for all the bits needs to be lengthened also.

Greg

[Billman]

I think the Flages works is not so bad! the cables must be nevertheless be changed!

Can Wizard-Of-Od please tell us who has made this mod and if there are more fotos available??

[Graham]

I doubt there would be enough room with the aircon and main rad in there, you might have to move them back slightly or angle them

[Billman]

I think it would go well if it was made the route after the TB like this one:

[Billman]

Sorry Offtopic question? Do someone use VR6 TB in the 5 cylinders? What mods must be done??

Greetings

[Audi Parts Guru]

I think it would go well if it was made the route after the TB like this one:

Where is that manifold from ?

[Billman]

You mean the first or the socond?

The first was send by Wizard-Of-Od in the AAN IM thread!

The second was there too!

Greetings

[Wizard-of-OD]

Can Wizard-Of-Od please tell us who has made this mod and if there are more fotos available??

Hi...sorry only now got directed here.
Well it appears to be an RS2 intake manifold that has had the plenum cut off and flipped around.The entire runner to plenum set up has been redone.
The Throttle Body section has been cut and an adapter plate has been made to face the Throttle body in any direction desired.
I guess the person wanted to retain a fashionable "porsche" emblem

[Wizard-of-OD]

and another

[Wizard-of-OD]

last one...

[Billman]

Thank you very Much !!!

[Wizard-of-OD]

Thank you very Much !!!

No Problem...glad I could help.