Reverse manifold accelerator cable help ?

[jsws3]

i have a cable making kit if you get really stuck

Ok cool ill keep you in mind mate .

[audinut]

i have a cable making kit if you get really stuck

[jsws3]

Daren do you have a part number for the wr cable ? Mate .

[jsws3]

Do you have a part number for it mate ?

[martinws]

I used a urs4 cable on my homemade reverse inlet.

[DJones]

I just used the original WR one.

[jade]

I have used bike cables and they have failed over time on my Furans set-up, normally where the cable turns

best way I found, is to use the inner of a old cable which has a lining on it which makes it more durable and join it with a short length of copper tube to achieve the right length. I then just use a length heat shrink to tidy it up

[GazzaG60]

maybe for a car with the wheel on the wrong side.

I believe there are loads of cables usable on a left hooker.

[Nik0las]

Golf 3 1.6 monoinjection!

[GazzaG60]

I bodged mine with a bit of brake line iirc. chop cable, insert brake line. crimp to hell. put it in the original sheath. worked a treat for couple of years.

jobs a good'n

[europeanme]

I've heard about people using scooter cables....and cannot go wrong with a bike cable....make sure its a good quality with teflon lining outer....

[4WheelDrifter]

Fit the original cable, but chop the inner cable so you can fit the end to the throttle body. Then call the AA/RAC/WHY, and they should be able to fit a new length of inner cable FOC.

A friendly local RAC man did mine, and I'm not even a member of the RAC. Top service.

[SteveH]

it's an easy job to do yourself. You can buy the inner cable, outer sheath and teflon liner. You can remove the old nipple on the throttle body end and reuse it.

[SE_30]

John, have a word with Will, he's making one for mine, and could supply you with another.

[nip]

Does anyone know what's the best accelerator cable to use on a Wagner reverse inlet manifold for a ur Quattro please as it's longer ect ect ?

John theres a place in tysley, before the bridge on the left , that does accelerator cables