RS2 Intake Manifold Question... HELP

[dean16v]

Dumb question but...

There is a vacuum fitting that threads into the front of an RS2 intake manifold near the freeze plug.

Does anyone know the thread size for this hole?

Reference material for a RS2 is limited here in the states and I cannot seem to locate any information on that thread size, let alone a part number for the fitting that threads in.

Thank you.

[Error404]

Try this:

http://www.s2forum.com/forum/showthread.php?t=12348

[Error404]

From that thread:

http://www.malpasonline.co.uk/ItemDe....QlN8DDAv.dpbs

[dean16v]

From that thread:

http://www.malpasonline.co.uk/ItemDe....QlN8DDAv.dpbs

Thanks mate!

[carboRS2]

If you read that thread will see there's no replacement from Audi but the part in the advised link works perfectly

[dean16v]

If you read that thread will see there's no replacement from Audi but the part in the advised link works perfectly

Yes, a little difficult reading on the mobile phone via TapaTalk, but I needed to know the thread size which appears to be

M8 x 1.0 pitch