What system?

[Sidspud]

I used to have a Scorpion system on my old Rover 220GTi. It also sat slightly to one side and very slightly squint

Maybe there's something wrong with Scorpions hanging system.

[dan_b]

Here's my Scorpion, exiting to one side. It sometimes knocks against the back of the car gently. (apologies for poor quality photo...)

[s2driveruk]

That milltek RS2 system on Martyns sounds lovely and deep standing at the rear!

Here's is pic of my rear end - ooooh er.....

[audiman]

Hopefully i will have a new back box made up before C.combe.
I am redesigning the way in which the box works. Instead of having a collector box then the silencer etc i am gonna run a proper straight through type back box. Here's a crap picture of what it is like at the moment.

[audiman]

This is another crap picture of what i want it like, should make it a little louder put also increase the flow, thus in turn giving less back pressure and better performance.

[audiman]

The tube in the middle of the box is perforated and rock wool (loft insulation) is used to reduce the noise. I forgot to colour in the second piccy. Good aint they? LOL

[porkkis]

Originally posted by s2driveruk
That milltek RS2 system on Martyns sounds lovely and deep standing at the rear!

Here's is pic of my rear end - ooooh er.....

David,

What system is this or custom work? I like that wide end.

[audiman]

Originally posted by porkkis
David,

I like that wide end.

Sounds dodgy!!!:eek2:

[Martynf]

Nice drawings Tom, did you do them with Crayola's? then photo them? You young men, no respect for your elders

The Milltek sounds very, very nice :-) maybe a little more noise would be good, but then, I've never really heard my car, have to get someone to drive her. From inside it sounds damn nice :-). One thing I HAVE to give Miltek 11/10 for is build quality and fitment. It bolted straight up, no adjustment, no bending and when tight the two tail pipes were in perfect alignment with the cut out in the bumper. Heaven.

Now I just need a K+N panel filter as I've been told it adds 20 horse to the car unless Doug modified it..... ;-)

[Doug_RS2]

Originally posted by Martynf
I've never really heard my car, have to get someone to drive her.

Maybe I'm sad but I love it when I see/here my car from outside getting driven - it's so different to inside the car. And she always floors it to the redline to annoy me :mad:

Now I just need a K+N panel filter as I've been told it adds 20 horse to the car unless Doug modified it..... ;-)

Has he fitted it then? He was meant to tell me how he got on - suppose he's to busy packing What were his impressions? I honestly didn't think it made a difference - but my car had been running with a couple of problems at the time.

[porkkis]

Originally posted by audiman
Sounds dodgy!!!:eek2:

Sorry, you misspelled "doggy", hope this helps :nana:

[audiman]

Gonna have to get me one of those special panel filters My cone filter must be slowing the car down. LOL

Doug, got any spare 20+BHP panel filters? LMAO @APG

My car sounds totally different outside the car. When i get my old dear to drop me off at the pub I always make her nail it. Scares the hell out of most ppl. And me when i hear the rev limiter working overtime!!

Wonder why it keeps breaking???

[Martynf]

Doug,

Yes, he fitted it last weekend, he says more power and you can hear the turbo more now also. He has been a tad bit busy, but I'm not smirking at all about it

Martyn

[s2driveruk]

Porkis - that pipe was one I chose from tons available to me when i had the system built - cost about £40 - just a rolled stainless tailpipe - looks the nuts when its been polished

David

[s2driveruk]

Tom,

that uncoloured rear box (god this is a dodgy sounding thread now) is the same as mine - there is no collector in mine, just runs off the cats , goes back into one pipe, round the rear driveshaft and straight into the back box.

David