AAN inlet manifold max power

[snp10]

What is the maximum power that a 2.2 can get using the AAN inlet manifold?

[Quattronaut]

Till 500-550 hp it´s quite fine. I think, there is still more possible- but then other one´s may be noticeable better. Up to that range, difference should be so little, that it is not worth the costs.

[Biturbo]

Alm racing run 800hp on original aan intake on his new Scirocco

[snp10]

For the begining I will use a Garrett Gt3076 turbo, so the AAN inlet manifold will be ok, because the target is 520 - 530 hp and maybe with W/M kit a little bit more.

[Quattronaut]

Should be no problem.
What car? To fit in an S2 or Urquattro, the mani must be modified, or the cooler has to be placed diagonal. AFAIk when using the mani with a 3b motor, you have to change water galery, and use a modified AAN or ABY one; don´t know exactly. So it won´t fit plug´n play. Throttle cable has to be changed, too...also servo pump hast to be placed over to the other side of the motor...

[snp10]

My car is a coupe quattro with 2.8 v6 original engine . The 2.2 is an AAN from Urs 4

[Quattronaut]

Ah, you want to fit the complete AAN into your car? So I think the servo thing should be not problem :-) water cooler I don´t know...I think that has to be changed anyway when going from V6 to i5t :-)

[snp10]

Yes, the engine is a complete Aan that will soon fully rebuilt with wossner pistons and forged rods.