You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
my car was not running fine and i have found out that one of the rs2 injectors was faulty (if i unplugged nothing changed so this one must be faulty)
i can try to clean the injectors but i have another set of injectors of a audi a4 2.8L 30v
could i swap these injectors or is this not a good idea?
the part number is: 078 133 551 L
my car was not running fine and i have found out that one of the rs2 injectors was faulty (if i unplugged nothing changed so this one must be faulty)
i can try to clean the injectors but i have another set of injectors of a audi a4 2.8L 30v
could i swap these injectors or is this not a good idea?
the part number is: 078 133 551 L
No, Its not a good idea! you need to run the injector the car is map for...
I would first check there isn't an issue with the wiring to the injector in question. Also. Change injectors around and see if the fault moves with the injector...
Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
S2 Coupe... bit easier off the line...
'03 ZX12-R daily hack.... lots of nice bolt ons...
Did you swap the injector to check the problem moves, and that there is spark at that cylinder.
Unplugging the injector narrows the problem to that cylinder, but does not prove injector, plug, coil, pos, ignition wiring, injector wiring, injector plug etc.
Did you swap the injector to check the problem moves, and that there is spark at that cylinder.
Unplugging the injector narrows the problem to that cylinder, but does not prove injector, plug, coil, pos, ignition wiring, injector wiring, injector plug etc.
Very true! Also do a compression test...can be head gasket.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment