MTM/PKM (carbon)airbox

[Kiku]

Does anyone have good pictures how MTM airbox fits in place and maybe how the cone filter sits under it? PKM had it from carbon fibre and MTM was plastic if i remember right?!

[saltinot]

[Kiku]

One in the pocket. If anyone would find a good picture whats going on inside of that thing.
Thanks saltinot!

[dubmanted]

Never seen one of these before would be interesting to see

[michaels2s]

The air filter is sucking the air from the wheel house so you have to cut a big hole in the inner Fender.
It is covered from the plastic Shell.
I think this more a compromise then a good solution.
But with large exhaust manifolds there is no space for the air filter housing.
I dont know what happens when you drive on wet days....
PK-Motorsport got them in carbon.
But its still a Piece from the past.

[Mcstiff]

Lots of missing pics in http://www.s2forum.com/forum/showthread.php?t=32266&

I thought I saved some but cannot locate them atm....

[Kiku]

Jep, i know that last posted topic and i hoped may be someone has saved those pictures.

[Error404]

I have quite a few pics. Will post up later if I have time

[Kiku]

So? Any pictures?

[Error404]

Sorry for the delay I've been super busy and not on the forum much:

These are what I have collected over the years.

[Kiku]

Omg, whats going ON with that wing. I have to adjust my idea, something like mercs have and modify the right wing.

Thanks for the pictures Alex!

[michaels2s]

Don"t cut your wing.
I think this is no good solution.

[rs2coupe]

Don"t cut your wing.
I think this is no good solution.

Agreed! road Sport quattro intake is best compromise

[Kiku]

I was not planning to do any thing like on the pictures(mtm had) i just wanted to know how the outer box is built. Anyways, i have in mind something like that.