will this intercooler fit??

[ferenc]

hi

i can buy a 680x200x80 intercooler,will this fit on a s2 standard bumper without break down the bumper??

I know that a 600x300x75 will fit

cheers

[Jeffer]

Nope it will not fit behind an S2 bumper. The RS2 IC can't be fit behind it without cutting some of the plastic grille. Maybe you can make it fit if you remove the crossmember.....

600 x 300 will not fit by far behind an S2 bumper without serious alterations

[Greg_S]

Not quite. The RS2 IC can be fitted behind the standard S2 bumper quite easily. a small notch has to be cut in the oil cooler duct for the bracket though.

http://www.s2forum.com/forum/showthread.php?t=1168

[martinjs]

A 600x300 i/c will just fit behind the stock S2 bumper but some trimming is needed from the back of the grills (can't really be seen from the front) but you will need a custom crossmember to hold it. Some serious butchering of the bumper will be needed to fit an ic which is 680mm long, if it will fit at all that is. Is that the core size btw??

[ferenc]

Making a custom crossmember is no problem.

Som trimming of the back of the grill is no problem to

hmmmz i think i going a intercooler from wood then i can see off it fit.