Dash

[Albie S2]

Hi

can any1 tell me how the bracket that holds the centre section of the dashboard in place looks like u will get the bracket behind the 3 gauges, is this bracket also attached to the floor or not.


thks chris

[s2carlo]

Hi

can any1 tell me how the bracket that holds the centre section of the dashboard in place looks like u will get the bracket behind the 3 gauges, is this bracket also attached to the floor or not.


thks chris

Hi Chris,

have a look at this s2central link http://s2central.net/centreconsole.html

I think that's what you need.
You need to loosen and shuf back the centreconsole rearpart.
Take of the heating (or aircon) cover.
Then you can shuf the centreconsole frontpart back just so much tat you can reach the rear of the centreconsole gauges

good luck

[Albie S2]

Ok this will not help much if i can get a scetch of this because i have to fabricate my own.

thks anyway
chris

[Albie S2]

Found out now the thing i am looking for is called "lower metal cross brace" any1 got a picture of this thing?

thks

[Jas11n]

Is this any good?

Click me

[Albie S2]

Thankyou very much now i have a idea on how this thing look like mine is missing when i bought the car and is jumping all over the place thks again

thks chris