cheers doug. top mod 
-
Pearl white 91-S2-3B K&N cone air filter - Home made induction pipe work - 18" RS4 replica alloys - Yokohama Parada Spec 2 rubber - Colour coded body work - Bilstein/H&R suspension - s/s 3in turbo back Longlife exhaust - SFS water hoses - Samco boost hoses - RS2 FARB - RS2 eyeballs - Squeaky interior trim
& 2 bar! -
Thats looks tops mate, are you doing the door pillars and the rest of the interior next...Greg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeks
Comment
-
Doug, roughly how much did you use?
Would 1m x 1.35m do it, or do you think it would prob need more than that?
The side panels on the door and back dont look that big, but can be deceiving how much you need to wrap around etc.
Ta.Ant
2007 Mk5 Golf GTi, 3 door, DSG, REVO Stg 2 and other goodies
2011 Kawasaki Z1000
Comment
-
looking good
ABY Coupe
sigpicComment
-
you don't use much of it - 1 x 1.35 should be enough.
Get really good glue though - as it gets stretched on an inside curve.S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
More alcantara coming! I have the black roof lining, handles, visors etc - but might alcantara the plastic surrounds around the door and on the pillers!
Be prepared for everyone that sees it, to stroke it!S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
LOL Doug!!
Cheers for that, i wanna lose the wood trim too. I'll prob go ahead and get some then.
Not sure how much you're paying but there is a roll on ebay for just under £30 for 1x1.35Ant
2007 Mk5 Golf GTi, 3 door, DSG, REVO Stg 2 and other goodies
2011 Kawasaki Z1000
Comment
-
Ant
2007 Mk5 Golf GTi, 3 door, DSG, REVO Stg 2 and other goodies
2011 Kawasaki Z1000
Comment
-
THat is the stuff I used - very good stuff - and padded.S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
Comment