for those looking for back lit gauges

[90quattrocoupe]

This company may be able to fill your wishes. No affillation.

Greg W.

http://www.omorimeter.com/52mm_gauges9.htm

[Jamo]

Seen those gauges before and i really liked them, expect they dont do them in Bars or KPa which to me is the only measurement to use on the S2.

[90quattrocoupe]

Seen those gauges before and i really liked them, expect they dont do them in Bars or KPa which to me is the only measurement to use on the S2.

Comes in Bars.

[BRY]

Seen those gauges before and i really liked them, expect they dont do them in Bars or KPa which to me is the only measurement to use on the S2.

Why?
I like mine in psi

[Jamo]

Comes in Bars.

Thats not bars that kg/cm2 which is approx 0.98 = 1 bar

1 kg/cm2 = 0.9804 bar

Different measurement

[Jamo]

Why?
I like mine in psi

Boy Racer measurement

[BRY]

Boy Racer measurement

Boy Racer Gauge - whatever measurment
Stealth man

[90quattrocoupe]

Thats not bars that kg/cm2 which is approx 0.98 = 1 bar

1 kg/cm2 = 0.9804 bar

Different measurement

sorry. I knew I would screw up the metric thing. Too old to learn.

Greg W.

[brinskan]

PSI is better than BAR... the scale for bar is not wide enough to monitor..

[HPmuirt]

PSI is better than BAR... the scale for bar is not wide enough to monitor..

Sorry, but that's just rubbish!

I have a gauge that is available in both BAR and PSI and they both move the same amount for a given change in boost/vacuum, only the numbers on the minor and major lines are different.

Since when do you read the actual reading on your boost gauge, unless you have a problem. You'll find that most of the time you glance at the gaude then look away and instinctivly know what the reading is...i.e. is it normal...not is it 1.4312 BAR or 24.956 PSI.

I agree that BAR is 'original' for S2's due to that fact that early Audi turbos used BAR and it was the measurement of the S2 era. PSI is for modern rice burners...sorry BRY...(but hey, you drive a stealth hearse so yours should be in RIP [Resultant Inlet Pressure] anyway )

Cheers n (cheap French)

Si

[A80Avant]

im definitelly buying one.I also bought a case for the main ventilation to put it in so now it wont glow so much at night if i buy this omori meter too!
great link guys!

[zlobo]

i am using omori the best thing is that you cam mach the collor with youre other guges.