S2 Coupe seats removal??Any hidden bolts please guys?

[s2dude]

ok. So I'm taking my seats out to get them retrimmed to original condition as the foam on the drivers bolster is a bit lifeless.......
Im whipping them out tomorrow night but am just seeing if anyone has done this on their motor and has any advice to give??

Like..."watch out for the two hidden bolts under the carpet..." !!! or something like that anyhow.....

Basically....is it a straightforward removal or is there a how to anywhere (or can anyone run though it please!) to save me freezing up out on the drive looking for some daft recessed bolt!!

TIA

[Skull]

Pull the seat as forward as it gets, sit in the backseat, with a flat screwdriver remove the plastic "screw" in the plastic shield on the gude near the centre console, pull the seat back again, there is an imbus screw with a 10 nut under the front of the seat, remove it, lift the lever and push the seat backwards so the legs fall out at the back.

[s2dude]

Pull the seat as forward as it gets, sit in the backseat, with a flat screwdriver remove the plastic "screw" in the plastic shield on the gude near the centre console, pull the seat back again, there is an imbus screw with a 10 nut under the front of the seat, remove it, lift the lever and push the seat backwards so the legs fall out at the back.

Great stuff....
Will give that a go tonight then.
Thanks for the heads up

[quattro_king]

my chairs are elektrick,so there are bolted in the floor

[s2dude]

my chairs are elektrick,so there are bolted in the floor

Mmm. Mine are just standard jobbies??