Racetech Boost Gauge Fitting

[razzabazza]

Have just recieved my racetech boost gauge and was confused when coming to fit it, There only seems to be one connection for a wire and vacum tubing certainly wont fit onto the gauge by its self alone.

Could one of those who have fitted one of these point me in the right direction.

Cheers

[Greg_S]

stick a pick of the back of the gauge and we can prob point you in the right direction.

[razzabazza]

Sorry pic isnt that good took with phone but then had to resize to get it on.

Basically electrically my guess is connect live to (A), and earth on one of the screws on the casing (B).

As for the actuall boost pressure connection looks like standard threaded oil presssure feed. So am thinking will need to rig some sort of reducer or some thing.

Any Ideas?

[MarkPS]

Hi

Just wired mine up today
You are correct, connect a 12v feed to the screw terminal on the back of the bulb housing and attached an earth wire to one of the screws on the casing, mine had a screw on hose barb fitting already so not sure where you will get one from.

I replaced the std bulb with this red multi LED light from http://www.ultraleds.co.uk/product_i...fe40d5d34f2655 a straight swap, so it matches the dash colour of my URQ

Regards
Mark

[razzabazza]

thank you

I recently instaled my plasma set and have already got a blue led jobby on the way.