Calling LHD RS2 with three spoke airbag owner

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GT500
    S2Forum Fiend
    • Jun 2006
    • 2181
    • Country: United Kingdom

    #1

    Calling LHD RS2 with three spoke airbag owner

    If you have such a vehicle, I am at my wits end trying to get the correct cowl for my steering wheel.

    I have orderd a pair from what can be made out on ekta, just arrived ,,, nothing like what i need!!!!!!!!!!!!!!!!!!!

    The one i need looks the same as this:


    Part numbers are the key to me ordering the right pair.

    The numbers are on the inside of the cowl, cowl should come off without taking wheel off.
    Any help much appriciated!

    Rob
    Last edited by GT500; 1 July 2008, 08:56.
    Rob..
    94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
    87 UR 20v ABY
    97 S6 Avant
    96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
    1967 Ford Mustang,Eleanor,460ci v8
  • rs2315
    S2Forum Maniac
    • Jun 2006
    • 867
    • Country: United Kingdom

    #2
    Rob, it's Steve. Might be a bit long winded but how about trying to get in touch with that company, (I think in Switzerland )Totsteile.
    After going on the site, looks like they know rs2's inside out.
    Maybe an email Address, and help from Ian with the German.
    Possibly make contact with them, send picture you posted of part, and ask for part numbers.
    What about Vagparts? If they can't, they might point you in right direction.
    Hope I'm not showing my naivety, just trying to come up with some ideas.
    Anybody on the forum have contact details for Totsteile?
    rs2315.
    sigpic

    Comment

    • jade
      S2Forum Extremist
      • Jan 2005
      • 1811
      • Home: New Zealand Current: Spain

      #3
      Hi i have posted a thread on fitting one
      You need to use the air bag ring of the four spoke wheel, then no need to change any thing, about 1.5 hours work
      Regards Jade
      RS 2 580HP

      Comment

      • s2avant
        S2Forum Fiend
        • Jul 2003
        • 2426

        #4
        Rob,

        I might have a pair in the boot of my car you can have for a nominal fee

        PM me the details of your car and I'll check my family album to see if they are the ones you need.

        Ben
        the best intentions are fraught with disappointment - gil grissom

        sigpic
        1994 ABY Avant - it's getting there

        Comment

        • GT500
          S2Forum Fiend
          • Jun 2006
          • 2181
          • Country: United Kingdom

          #5
          Originally posted by jade
          Hi i have posted a thread on fitting one
          You need to use the air bag ring of the four spoke wheel, then no need to change any thing, about 1.5 hours work
          Regards Jade
          Jade i have had a look at what you suggested... i could not see how this could be done,, the four spoke ring is not even close to fitting to the three spoke,,

          Have you any pictures?

          Thanks,
          Rob
          Rob..
          94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
          87 UR 20v ABY
          97 S6 Avant
          96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
          1967 Ford Mustang,Eleanor,460ci v8

          Comment

          Working...