Rear Sear removal in 3B...Help ?

[The Chef]

Well I have used the search function and still appear to be in the dark...
I have removed the 17mm pins either side got the rear bench out and the two side bolsters and rear cards. I am now left with the split folding seat backs and armrest
What I would like to know is..Am I supposed to unscrew the 2x phillips screws on the left and right side hinges or does the middle hinge on the rear panel come away?

thanks in advance

[curlyks2]

There's a guide to removing the rear seat on the second page of this thread - post #19 (I think) by Greg.

Good luck!

Ck.

[The Chef]

Thanks for that...
Although that only goes as far as I have...I have removed boot carpet shelf supports seat belts etc etc... I still have the folding seat backs in the car.
If I undo the screws in the hinged arms I will still have the middle anchor point. So would like to know the easiest way out with them... before I warm up the grinder:mischeif:

[Skull]

remove the 2 plastic trims in the middle of the 2 seats, unsrew the 4 screws, and pull them out.

[The Chef]

Cheers guys...
Knew it had to be that simple..

[DEREKCO]

rear folding seats

Hi i changed my interior for a leather one the rears were very easy to replace as already been said remove 8 screws and out they come although mine had a coating of stud lock applied so screws were tight to come out but out they came