Removing middle air vent

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Big Lee M
    S2Forum Fiend
    • Jun 2007
    • 2571
    • Country: England

    #1

    Removing middle air vent

    I'm putting in my boost gauge today and was woundering how the hell to remove the middle air vent without braking anything?

    Any tip would be great cheer Lee

    sorry tripple post computer was playing up and it all went blank
    Last edited by Big Lee M; 22 September 2007, 09:35.
    Just some finishing touches to do now
  • sjw185
    S2Forum Extremist
    • Jun 2007
    • 1175
    • Country: Scotland

    #2
    took mine out with a pair of long nose pliers and a cloth. grip the middle vertical at the top then the bottom pops out no problem

    Comment

    • Big Lee M
      S2Forum Fiend
      • Jun 2007
      • 2571
      • Country: England

      #3
      Cheers buddy
      Just some finishing touches to do now

      Comment

      • LHD_Kid
        S2Forum Possessed
        • May 2006
        • 3697
        • Home: England Current: Belgium

        #4
        turn the vent fully to one side or the other, and pull on the top corner, it will unclip from the top fixing, carefully straighten the vent and pull the top straight out, will come out unclipping the bottom as it comes.....
        you can be a little more brutal than you think, and this will notmark anything as its only your fingers doing the work...
        HTH
        Chris
        Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
        S2 Coupe... bit easier off the line...
        '03 ZX12-R daily hack.... lots of nice bolt ons...

        Comment

        Working...