i thought i'd make my own
just got to spray it
see what you think
[IMG]
[/IMG]
just got to spray it
see what you think
[IMG]
[/IMG]
-
Last edited by topsparky; 23 November 2007, 21:39.1. SHORT SHIFT KIT
2. PORSCHE CAYENNE CALIPERS
3. H & R SPRINGS
4. BILSTEIN SHOXS
5. NEW BUSHES AND HP2 STRUTS
6. UPRATED HIGH OUTPUT COIL PACK
7. ,3" turbo back s/s/ exhaust
8. fmic fitted -
To be fitted where .. i thought that you already had the gauges mounted in the top of the dash ,or have i got my wires crossed. -
this is for egt ,boost and fuel pressure
to be fitted where the centre vents are1. SHORT SHIFT KIT
2. PORSCHE CAYENNE CALIPERS
3. H & R SPRINGS
4. BILSTEIN SHOXS
5. NEW BUSHES AND HP2 STRUTS
6. UPRATED HIGH OUTPUT COIL PACK
7. ,3" turbo back s/s/ exhaust
8. fmic fittedComment
-
This looks more like it could be done like this to fit in front of the passenger on an S2, its the wrong shape for the vents in our cars....!
Lets see what it looks like painted and fitted, nothing ever looks really good until complete...!
Then we can all mess around with ours using your ideas....
ChrisHonda CBR 1100XX Blackbird Turbo....undergoing major changes.....
S2 Coupe... bit easier off the line...
'03 ZX12-R daily hack.... lots of nice bolt ons...Comment
-
two gauges fitted and painted
[IMG]photo 1[/IMG]
[IMG]
[/IMG]
1. SHORT SHIFT KIT
2. PORSCHE CAYENNE CALIPERS
3. H & R SPRINGS
4. BILSTEIN SHOXS
5. NEW BUSHES AND HP2 STRUTS
6. UPRATED HIGH OUTPUT COIL PACK
7. ,3" turbo back s/s/ exhaust
8. fmic fittedComment
-
[IMG]
[/IMG]
1. SHORT SHIFT KIT
2. PORSCHE CAYENNE CALIPERS
3. H & R SPRINGS
4. BILSTEIN SHOXS
5. NEW BUSHES AND HP2 STRUTS
6. UPRATED HIGH OUTPUT COIL PACK
7. ,3" turbo back s/s/ exhaust
8. fmic fittedComment
-
Nice looking, I had one made up so the two guages on mine sitted on the a pillar trim, looked good bit fast and furious tho
Comment
-
Looking to add oil pressure and boost pressure gauges to my UrS6 so looking for a solution.
Possible places I have found are ashtray area and centre vents. Don't want to lose al of the vents but don't mind losing the ashtray.
Only problem using ashtray area is that it is a bit too low down for my liking.
There is also the gauge sized spaces either side of the steering wheel although this means cutting into the dashboard, not good.UrS6 - Homefry, Bailey DV, PiperX filter, Samco hoses, H&R springs, 3" D/P back zorst, 270bhp and 260ftlb :rock:
Triumph Daytona 955i - mmmmmm :fire:
80 dag dag :driving:
Comment
-
All depends how much space you have behind each area, tbh i'd either want them up higher or in the a-pillar if it was me just so they are easy to see.Comment
-
defi do a nice meter that projects onto the window.
i had that issue where i wanted to fit boost EBC, EGT and WB02
i have used a perrin steering mounted pod designed for a subaru. was the best thing i could come up with to not make the dash or the skinny pilars look badComment
Comment