Audi Coupe Dash Clocks

[RoadKill]

would standed coupe clocks work on an s2 3b cant get the <- -> lights to work its just for mot so would only fit them for that then take them back out ?

[Acidburn]

Afaik they should do as i've fitted s2 dials in a 20v before.

[ujimaflip]

Would be good to know - I need to make mine look OEM to smuggle in to Belgium... I have the plasma dials - no kph when the lights are off..... Audi 80 dials often on the bay. Shame I cant rent some for the day

[Acidburn]

i'd almost bet on it as like i said i've fitted s2 dials into 20v's etc with no problems and i know of loads of people doing the same.

[s2_bo]

Yes Peter is right there. I also know of a couple of cases where people have fitted S2 clocks in to coupes with out issues.


I presume you have checked the dash bulbs? Do they still come on if you put on the hazard lights??

Do your indicators come on at all? There is another way round it if you get really stuck but its a bit of a PITA.

[Acidburn]

you will just have the wire for the trip computer/atd sitting there (unless your other dials have that there) but apart from that it should just go straight in no probs.

[Error404]

S2 clocks are a straight swap for 20v coupe clocks.

I've got a spare set of normal black 5cyl 7k tach 160mph clocks

[RoadKill]

thanks for the help , i shell pput the black ones in just for mot , i have played with them and its not the led's , if i put them in and it dont sort it then i know that its somthing else