Heated seat element pin out

[Error404]

Installed heated seat elements into my coupe, the connectors have been removed to get the elements out of the old seats but the previously owner thoughtfully left the spade connectors on the wires rather than just cutting them

I've ordered two new green 6 pin connector housings, can anyone help with the pinout, or even better wire colours for the 6 pins of the green seat connector would be much appreciated

Can anyone with heated seats help?

[S2central.net]

http://s2central.net/S2_Schematics/D/D13.PDF

May or not be exactly correct for your model year - this is for MY92 COupe.

[Error404]

getting an error404 Paul. (is that ironic or just an unfortunate coincidence?! )

I did look on S2central on the 3B schematics page but couldn't see anything to help. Was I looking in the wrong place?

[S2central.net]

Ahh the irony of that is quite funny... I'm posting some new electrical content. Thought it had killed my site, but nope - you just need the www prefix now...

http://www.s2central.net/S2_Schematics/D/D13.PDF

Like I say - may not be perfect match for your year... Work in progress on this going nicely.

[K Simmonds]

I have a heated seat base knocking about, sorry about the pic but it's the best my phone can do.

from the left on top 1, brown. 2, brown / blue. 3, thicker brown - to seat back.

On the bottom 1, black / yellow. 2, black / white 3, thicker brown/ blue - to seat back

The seat is out of a 1990 S2, hope this helps.

[Error404]

thanks guys

don't know what year car my elements came from but they are the same as the pic above