Dial Pod Adjustment...

[Lloyd]

I would like to adjust the 3 gauge pod to try and eliminate a minor vibrational 'rattle'.
Having inspected the pod, I've noticed that it (and of course the three dials) sit maybe 10 mm back from the inner lip of the trim above.

When I saw Sherv's RS2 I could see that his dial pod was located much further forward which also made it easier to read the dials.

Has anyone had a go at adjusting this unit? Would appreciate any tips/suggestions on how to do it as do not want to strip more out than needed

cheers

[dest]

The 3 gauges are held in place with 2 screws on each side, which can be loosened and then moved back or forwards.
To get at them you will need to remove the centre console, and then the front section which houses the gauges.
There are some threads covering the removal of these if you use the search

[Lloyd]

http://www.s2forum.com/forum/showthread.php?t=21577&highlight=gauge+cover

Link above to excellent guide by Jas on 'how to' ...