well if any of you have read my project thread you will know that i plan on fitting a roll cage in my s2 but i would first like some outside opinions as to which to go for.The ones i am looking at are from custom cages and come as pre bent tubes ready to weld.
The car will spend more time on the road than the track but i don't want to compomise too much as far as strength and rigidty goes .The "cl4" cage looks great but the door bars may be a PITA to live with,so it's a choice between "cl2" and "cl3".I know that a cage isn't stricly necessary as i don't plan to compete or anything but what can i say-i want one!
opinions wanted!
here's the link:
The car will spend more time on the road than the track but i don't want to compomise too much as far as strength and rigidty goes .The "cl4" cage looks great but the door bars may be a PITA to live with,so it's a choice between "cl2" and "cl3".I know that a cage isn't stricly necessary as i don't plan to compete or anything but what can i say-i want one!
opinions wanted!
here's the link:
. IMO, best thing to do is see whether they can make the front sections bolt in. With some padding the front tubes might be OK but the S2 is a tight car unless you're floor mounting the seats and then you'll not see over the dash!
Comment