after market steering wheel boss for airbag

[gavs20v]

I want to fit my aftermarket steering wheel to the cab. Problem is the cabs airbag equipped. Does anyone know of an adaptor boss available speciaically for airbag models ?
Gav

[rs2coupe]

Here is what you need. I'm in the process of doing this too.

upper and lower column covers from a car that has standard non-airbag steering wheeand the boss hub for the 80/90 B3/B4. Could be made by any brand like momo/nardi/boss etc..

[gavs20v]

ive already got the boss as ive had the wheel on numerous other 80/90 cou[es ive had but none have had airbags. There's no wiring there for the horn in the same way the non airbag models have

This is the reply i got when i asked a similar question on fans

The airbag wheels use a different means of activating the horn, there is no copper strip for the horn connector, instead there is a plastic collar mounted on the rear of the wheel with an internal swivel that the horn wire pushes in to. This collar fits in to a square hole in the cowling so it all becomes neat and flush.

The logical next move is to swap the cowl over and fudge a wire to activate the horn, the cowls are not interchangeable to my knowledge and the centre hole for the indicator cancel is different between the 2 with the airbag wheel having a larger diameter inner. This also precludes the fitment of the airbag switchgear to the non airbag steering column, plus on my cars at least the wiring was different!

[evokid]

Hi did you find the answer to this in the end?
I have a 1995 B4 Coupe and want to fit my Audi 80 3 spoke wheel too....But mine has the Airbag and square slip ring setup....

Do i need to remove square slip ring and transfer, or modify old boss adapter?
Have read elsewhere to swap over cowl and switches from older coupe without airbag? Is this do-able

Thanks in advance