Centre vent for boost gauge

[Le S2 Audi]

Do these stick over the vents after you drill them or do they fit in place of the vent? I was about to start making something similar, but am quite tempted by one of these now!

They replace the vent... you have to cut the back plate so the gauge fits and the vent off unit stil works.... but thats only a 5 min job...

[montez]

Do these stick over the vents after you drill them or do they fit in place of the vent? I was about to start making something similar, but am quite tempted by one of these now!

[HPmuirt]

Hiya

Thankyou...........for info................
I looking for the tripple gauge set up


I emailed him nw to see if he could help

cheers
john

Gerd is a very nice guy. I ran 5 groups buys for his OEM boost gauge and 3 group buys for the 1 & 3 slot gauge holders. We managed to get a discount on the holders as I was buying so many gauges, but outside the GB they were €40 or €50 I think.

I run the single holder, as can be seen here

Cheers n

Si

[JMLAudi]

Thankyou

Hiya

Thankyou...........for info................
I looking for the tripple gauge set up


I emailed him nw to see if he could help

cheers
john

[Le S2 Audi]

You have to email Gerd... From the site...

But they are quite dear to buy....

This is the Ebay store...

http://cgi.ebay.co.uk/Alu-Zusatzinst...#ht_3193wt_939

[JMLAudi]

Where to get one of these

Hi

Where can i get one of these...or has someone got one for sale???

Bought mine here: http://www.audis2fast.de/konsole.htm

Been on link ..........i cant seem to find info i looking for..............

cheers
john

[gmac78]

Yes thats a lot clearer now. I was wondering why one pic of the bracket had 'turbo' engraved and another had 'oooo'.

Cheers

[Le S2 Audi]

If you want it in black & silver with the OOOO you have to email them...

Here is a google translation of the advert;

So you can decide how to make the bracket, either way it is: Aluminum black anodized or natural aluminum - polished with 240 grain matte or gloss or polish or similar with clear lacquer Paint ...

The support comes in the outlet in the center console. You can use one, two or three pieces. In all three holes and fits perfectly. If necessary simple fix in addition to 4 small silicone dots. It must not be drilled or broken, Allowing easy dismantling possible.

The optimal solution for the RS2 / S2 to integrate a turbo boost pressure gauge in the cockpit.

The bracket may also at any Audi 80 B3 B4 - RS2, S2, V6, 2.0 2.4 2.6 2.8 Quattro, be convertible, Coupe, Avant, etc. installed -.

Delivery: 1 x Aluminium bracket

TRADE MARK
Protected names and characters belong to their owners. All of the above in this description, names of brands or companies belong to their owners and are without any guarantee of the availability of free play. The names are either registered trademarks or should be regarded as such. Please note that the rights of all logos, brand names, trademarks, etc. are by their respective owners.

FAQ

Question:
Hi, one question for you. When I look at their photos, I can not see exactly how they are of the color scheme here. Are they more like in the left column of the 2nd (surface treated gray) or the 3rd (As painted black) picture from above? Request for info. Mfg

Answer:
Hi, yes with the color and lighting when photographing, I had extreme difficulties ...
The background is of rich black velvet, why it looks much darker as the holder, I know not. On a white background, the holders are black as black as the back of the velvet.
The holders are so natural in aluminum foil as silver, semi-gloss and thereby through the 240 grain sooner.
The holders are deep black and matte black - not gray but rather as black as soot. sheen in direct sunlight emerges, a slight metallic.
The difference is in the second to last picture with the caption "" OOOO "special two-color: black anodized aluminum rings nature" is not really clear :-( The black actually has no blue tint. One can therefore say that the black surface not (like on) looks painted, but as "colored."

[Le S2 Audi]

The German Ebay Link posted by Jas11 in post #2...

http://cgi.ebay.co.uk/Alu-Zusatzinst...#ht_3193wt_939

[gmac78]

Centre vent

You can order it in all black... or Black with Silver OOOO

Quite like the look of that actually, who might supply these?
Cheers

[Le S2 Audi]

Alright mate

Yeh was just looking for one to cut myself, if you've got one spare that would be sound. A few lads showed links to the german ebay where they have smart aluminium surrounds for the gauges but dont want to give anymore thieves anything shiny to attract their attention!

Im offshore at the moment, as of yesterday, but will give you a buzz in a fortnight when i get back to come and meet you if thats ok. Thanks for your help.

Gordon

You can order it in all black... or Black with Silver OOOO

[als2]

Whos this kind local gentleman???? oh! thats me! makes me sound weird! lol

no probs mate, just drop me a pm when ur about and ill dig one out.

AL

[gmac78]

Centre Vent

Thanks to all for your help regarding my vent issue.
I kind local gentleman is sorting me out.

Cheers

Gordon

[gmac78]

Centre vent

You just looking for a standard vent to cut yourself??
If so ill stick one in the post or drop it off.

AL

Alright mate

Yeh was just looking for one to cut myself, if you've got one spare that would be sound. A few lads showed links to the german ebay where they have smart aluminium surrounds for the gauges but dont want to give anymore thieves anything shiny to attract their attention!

Im offshore at the moment, as of yesterday, but will give you a buzz in a fortnight when i get back to come and meet you if thats ok. Thanks for your help.

Gordon

[als2]

You just looking for a standard vent to cut yourself??
If so ill stick one in the post or drop it off.

AL