K24R -0.5 +2.5 Bar boost gauge

[Rusty]

Following a few requests, I am looking to have faces made to provide a boost gauge over 2 Bar.

Using the same base gauge as my 2 Bar gauge, I can offer -0.5 bar to +2.5 bar. An alternative would be to use a different gauge and run 0-3 bar but I hope -0.5 +2.5 should cover most applications?

I really need 10 off orders to make this work, due to the dial face design and manufacture cost, any less and the cost of the guages will be higher.

Due to small numbers of dial faces that I'll have made (1/5 the number of the 2 bar), the price will be £89 (assuming 10 off), including delivery to the UK, usual +£5 European and +£10 RoW addional postage applies. For 5 off, the price will be £99 each.

Current parties are:-

1. Rocco
2. Lars Erik Johannesse

Please add your name to the list.

[QuattroFever]

im in

[Rusty]

1. Rocco
2. Lars Erik Johannesse
3. QuattroFever

[Simons]

Hi Rusty, I think that the gauge needs more vaccum pressure...arround -1bar to have more "headroom" when the engine is retaining or idling my engine shows -0,8 and -0,6bar

[Rusty]

I know, that's why I do the -1 to +2 gauge.

As the gauge has a 3 Bar sweep, I can't magic anything more out of it I'm afraid.

[Simons]

Ok Rusty! Thanks for the explanation

[madpugger]

Count me in mate. let me know when its a definate and I will pay upfront again.

Cheers
Mike

[SE_30]

I'll take one. let me know when you need paypal payment..

[Rusty]

1. Rocco
2. Lars Erik Johannesse
3. QuattroFever
4. Madpugger
5. SE_30

[QuattroFever]

these will be in s2 white (or grey as it were) colour dials or the rs2 white?
Ive got a set of bo's gauges not sure what colour match they are, need to msg bo.

If they turn out rs2 spec. Can you match each dial for preference or is it a one for all kind of thing.
Sorry for bad wording...getting late.

[Rusty]

S2 grey and RS2 white in Bar, not sure on plasma gauges, I think they're white.

[Rusty]

Is anyone after one of these in PSI or is it only Bar?

I can start this in the new year based on the 5 people above being prepared to pre-pay at the higher price of £99. Afraid I've been let down a few times recently so I won't even place the order until all the money is in as promises seem to be worth very little when it comes to paying money nowadays Hope you all understand.

[Rusty]

Here's an artistic impression...

[Rocco]

i like them so much

[Rusty]