Interior swap

[Rikki Kitto]

Anyone fancy swapping my interior for a fee? bought it ages ago of Pete and just can't bring myself to do it to much work on not enough time on my hands

[gavs20v]

Happy to help but wouldn't want anything for it. Should only be a couple of hours depending on how much is being swapped over

[Acidburn]

easy enough to do, i'm only working 2 days a week currently (but getting paid 5 ) so have spare time.

[Ross]

I know Pete can do the seats in about 20 mins

@Pete, you let that one outta the bag

[fyans1974]

Swap

Here i know the feeling i'm looking for someone near me to help fit the plasma dials and vdo gauges into my coupe but with no avail at the mo. So if there's anybody out there willinh to help for a fee and near to where i live that wouls be ideal. I'm in Dundee. Cheers Steve.

[Acidburn]

I know Pete can do the seats in about 20 mins

@Pete, you let that one outta the bag

you should see me fit gearboxes/diffs

[willg54]

you should see me fit gearboxes/diffs

Want to fit mine?!

[Acidburn]

lol how far north is bromsgrove, and it was around an hour or more to fit the gearbox/diff

[Rikki Kitto]

Cheers for the offers guys PM'd Pete

[willg54]

lol how far north is bromsgrove, and it was around an hour or more to fit the gearbox/diff

Just south of Birmingham.

I should be ok, quite looking forward to putting the mass of bits back in!

[s2_bo]

lol how far north is bromsgrove, and it was around an hour or more to fit the gearbox/diff

Seriously! 1 hour to do the box?
Thats incredibly fast, it took me a full 12 hours to remove and replace my s2 one on my own on the drive and im not exactly slow when it comes to working on cars.
But one hour must be Guinness book of records territory

[Acidburn]

he only said fitting lol, I fitted mine the other day

[s2_bo]

fair enough, still dam quick though mate!

edit: sorry for this off topic blather

[Acidburn]

It wasn't too bad, built everything up on a trolley jack in front of the car so it was:

box
subframe
wishbones
cast arms

then slid it in under the car (once we'd raised the car to clear the box) and using two jacks raised it up into the car then just bolted the subframe in.

Then did the same with the rear:

bolted rear diff to the subframe and slid this under the car and jacked it up into the car and bolted it in (only one jack needed with this)