Middle Dash Vent Blanking Plate ??

[ian4455]

I did mine (very slowly!) with a hole saw then file and sandpaper it to tidy up. Get rid of the horizontal bits first and watch out for the clip

Worth doing, even if you use a piece of alloy plate -

[Mcstiff]

I did mine (very slowly!) with a hole saw then file and sandpaper it to tidy up. Get rid of the horizontal bits first and watch out for the clip

Freeze the vent into a block of ice and you can drill it with ease.

[diogocartier]

I just bought the one from ebay.

Let's wait....

[terrybullwon]

I have a Ali plate that holds three 52mm gauges for the center vents.

Sat here doing nothing if any one wants it

[newsh]

I did mine (very slowly!) with a hole saw then file and sandpaper it to tidy up. Get rid of the horizontal bits first and watch out for the clip

[LHD_Kid]

I just made one in MDF, sprayed in satin black, fits perfectly with the rest of the dashboard...

[|CL|NIKI]

Thanks mate.

[andy10v]

Not the neatest job, but only took a couple of minutes so it does me.

I pulled out the horizontal strips first with needle nose pliars. Dont loose the little clip that holds it in the dash, it falls out one you have broken some stuff off.

[simon20vq]

with a little hack saw

[|CL|NIKI]

Just cut the stock vent to fit the guage.

Really? That was My firs idea too... But when I try - just broke around about 2-3 vents.
How to cut it clearly ?

[newsh]

How that's made?

Just cut the stock vent to fit the guage.

[|CL|NIKI]

You can get the single alloy gauge vent on ebay.de for about £30ish

http://cgi.ebay.de/Alu-Zusatzinstrum...item53e6b1589b

Or ghetto it;

How that's made?

[sidrick]

I'm interested.

[Nimz]

Can we see if we can get a group buy on this Ian...surely there'll be 50 members interested?! There's me and 2 others for a start...


---
I am here: http://maps.google.com/maps?ll=53.129181,-1.302586

[Nimz]

Could we get a group buy on these...surely we can get 50 members together?! There's me and 2 others interested for a start...


---
I am here: http://maps.google.com/maps?ll=53.129251,-1.302481