Urs6 clocks into urs4

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bluequattro
    S2Forum Fiend
    • Nov 2004
    • 2960
    • Country: United Kingdom

    #1

    Urs6 clocks into urs4

    Can s6 clocks plug m play into urs4?
    My speedo has peeled so I bought new clo cks but they're from s6, buyer didn't tell me that
    Digital trip not analogue etc so can't change the faces
    I didn't know(not tried yet) if needle not moving due to peeling or speed sensor
    Any thoughts?
  • K7ERG
    S2Forum Extremist
    • Mar 2004
    • 1711
    • Country: Scotland

    #2
    If I remember correctly I put urs6 in my urs4 and it was ok. I then found a mint condition set of urs4 clocks and swapped back. I had urs6 clocks in my Audi a6 tdi. But the Speedo and rev counter wasn't accurate.
    Audi A6 AEL 5cyl Quattro breaking.
    Audi A5 3.0tdi Quattro Stage 2
    07947385043

    Comment

    • bluequattro
      S2Forum Fiend
      • Nov 2004
      • 2960
      • Country: United Kingdom

      #3
      Had a better look at the s6 clocks today
      There's a bank of bulbs over time clock that aren't on the s4- engine check, air bag and door locks
      Will they work with s4 wiring?
      Liking the idea of boost instead of mpg (assuming that's what bar in computer screen is for)
      Any thoughts?

      Comment

      • K7ERG
        S2Forum Extremist
        • Mar 2004
        • 1711
        • Country: Scotland

        #4
        Bar is for boost pressure+ atmospheric pressure. So will read 1.9bar if standard with overboost 2.1bar. If I remember correctly.
        Audi A6 AEL 5cyl Quattro breaking.
        Audi A5 3.0tdi Quattro Stage 2
        07947385043

        Comment

        • UrS4boy
          S2Forum Obsessed
          • Feb 2006
          • 11859
          • Country: Canada

          #5
          Originally posted by bluequattro
          Can s6 clocks plug m play into urs4? My speedo has peeled so I bought new clo cks but they're from s6, buyer didn't tell me that
          Digital trip not analogue etc so can't change the faces...Any thoughts?
          There is definitely a difference in the speedometer face and the odometer reset rod that prevents swapping of speedometers between UrS6 and UrS4 cars. The tachometers and the secondary gauges probably swap across okay. You might be able to swap the complete cluster across if all the plugs can find a home.

          EDIT: A UrS6 cluster is on the top this photo. UrS4 Euro cluster is below it.

          More cluster info here: http://forums.quattroworld.com/s4s6/msgs/168359.phtml

          Last edited by UrS4boy; 5 January 2013, 21:44.
          RS2'd 93 UrS4 5 spd sedan
          94 UrS4 V8 6 spd manual avant

          Comment

          • bluequattro
            S2Forum Fiend
            • Nov 2004
            • 2960
            • Country: United Kingdom

            #6
            Cheers urs4 boy, fountain of all s4 knowledge,
            I ve read lots of your posts on other Audi forums and already learnt lots
            Keep up the good work

            Comment

            • UrS4boy
              S2Forum Obsessed
              • Feb 2006
              • 11859
              • Country: Canada

              #7
              Originally posted by bluequattro
              Cheers urs4 boy, fountain of all s4 knowledge. I ve read lots of your posts on other Audi forums and already learnt lots. Keep up the good work
              LOL. Thanks. However, the "fountain" sputtered and leaked in the above post. (I got the UrS4 and UrS6 clusters momentarily mixed up ).

              I have edited the post to read:

              "A UrS6 cluster is on the top this photo. UrS4 Euro cluster is below it."

              Sorry if that caused confusion.
              RS2'd 93 UrS4 5 spd sedan
              94 UrS4 V8 6 spd manual avant

              Comment

              • bluequattro
                S2Forum Fiend
                • Nov 2004
                • 2960
                • Country: United Kingdom

                #8
                Non at all, I m more basic than that to notice-I d use a hammer to fit them if needed, lol

                Comment

                Working...