Coupe Headlining

[gripper]

I will be removing and recovering my sagging coupe headlining in the not to distant future

Been toying with a few ideas one of which was to use quattro scripted material (if you can still get it) !

Gash or cool ?

Please feel free to shoot me down in flames
Will not be using this on the sunroof panel though

[sidrick]

Original, if anything

You're welcome to my Quattro script interior covers when I remove them (rears whenever, fronts when I can afford leather) for the cost of postage.

[Error404]

I don't think they make it wide enough
You'd need to check but i suspect you'd have to joint two strips together Chris, which I think would spoil it somewhat

[re2500]

I think its a very cool idea. Im not sure it is sold in wide enough strips though???

[gripper]

I need to do a bit more research and some measurements
I'm sure there was a thread somewhere quoting where to get it from, how much it costs and how wide the rolls were

[mdz]

That cloth was available in Audi Tradition.

[gripper]

Found this but with Audi Tradition site down I cannot check sizes ?

http://www.s2forum.com/forum/showthread.php?t=56251&highlight=quattro+script+material

[benntenn67]

Whats wrong with the manky, sagging headlining look anyway

[gripper]

I have made a few quick measurements and I need a piece approx 94x142cm (standard piece is 142x42cm)
Spoke to Sebastian at Audi Tradition who informs me if I order two pieces it will come as one piece 142x84cm (close but not close enough )
I have emailed him again enquiring about 3 pieces.

150e just for material

The cost of trying to be unique !
(unless you know of someone that has tried this before ?)

[re2500]

Mate! If you can do it i think it would look ace!! Platinum quattro fabric should match well with the platinum pillar trims....

[re2500]

....either that or dark fabric and spray the trims to match??