Steering wheel options/advice

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jack4688
    replied
    ....might even add Recaros to that list now

    Leave a comment:


  • Jack4688
    replied
    Just had a look, I'll give it a proper go when I've got my socket set

    I'll have probably bought a new wheel before the week is out - original plan was to swap the Avus IIs currently on the car for some original Avuses until I've sold my Ibiza. Now add a new stereo and new steering wheel to that list

    Leave a comment:


  • Error404
    replied
    push it in and turn it anti clockwise a 1/3 turn and it pops off

    Leave a comment:


  • Jack4688
    replied
    Ahaaaa thanks for that, does the centre cap just come off with a poke with a flathead?

    Leave a comment:


  • Error404
    replied
    I've got another Nardi, just getting it trimmed differently

    Jack you don't need to do any of that. Take the centre cap off the wheel and undo the 24mm nut on the steering column, unplug the horn connector and pull the wheel off. I recommend making sure the wheels are pointing dead ahead so you can put it back on straight first time

    HTH

    Leave a comment:


  • andy10v
    replied
    Originally posted by Error404
    I will have a freshly trimmed Nardi wheel for sale in the near future, if you are interested
    What have you acquired now?

    Leave a comment:


  • Jack4688
    replied
    Had a quick look last night at what I need to undo in order to get the wheel off. I saw two screws in the cowling/cover from underneath plus an oval slot in the middle and underneath, through which I could see a hex-head screw when looking at an angle.

    Do you only need to remove that cover to get the wheel off or does that awkwardly placed hex screw need to come out too?

    I'm not going to be fiddling about with it until I pick up some actual tools next week, but knowing my luck I'll have a nosy about in there and end up having the steering column fall out and need five pairs of hands to put it back together

    Leave a comment:


  • Error404
    replied
    They just bolt onto the S2 wheel boss

    Leave a comment:


  • rynaqui
    replied
    I love those Nardi wheels

    Always wondered what was needed to fit one to an S2

    Leave a comment:


  • Jack4688
    replied
    Mmmm I'll admit they are tempting...... maybe that makes it a shortlist of three

    Leave a comment:


  • Error404
    replied
    I will have a freshly trimmed Nardi wheel for sale in the near future, if you are interested

    Leave a comment:


  • A80Avant
    replied
    I stand corrected then :thumbup:

    Leave a comment:


  • ralleyquattro
    replied
    Just FYI my Sep 93 built S2 Avant has both Driver Airbag and ProCon10 system.

    HTH

    Leave a comment:


  • Fat Audi 80
    replied
    Originally posted by Jack4688
    So in lamens terms I need to tw@ into a wall much harder to make the Procon-Ten system of any use
    Yes.

    Leave a comment:


  • Jack4688
    replied
    So in lamens terms I need to tw@ into a wall much harder to make the Procon-Ten system of any use

    Leave a comment:

Working...