Electric seat wiring?

[Deacs]

Does anyone have a wiring diagram showing wiribg/ colour codes for Audi 80 electric seats?

[Error404]

Its really easy I made my own harness for them - literally it is just a twin 2.5mm2 feed from the L30 on the fuse board, into two 30A thermal fuses (one for each seat), an earth eyelet for each seat (pick that up from the stud alongside the aux relay panel under the dash). Then run your 2.5mm2 30a supply from the thermal fuse along with the earth to the 6 pin seat plugs. +30a to pin 2, earth to pin 5. (same for both seats).

HTH

[Fat Audi 80]

Do a search, I posted some pics of the one loom that Alex is describing...

HTH

Cheers

Steve

[UrS4boy]

Does anyone have a wiring diagram showing wiribg/ colour codes for Audi 80 electric seats?

S2central.net http://s2central.net/main_frame.html

Technical Data

Electrical Systems

S2 Current Flow Diagrams

Scroll down to Audi 80 S2 Avant and click on it

Select MY94-ABY-A

Scroll down to D64 for Electric Seat Adjustment

Scroll down to E20 and/or E12 for heated seats.

Good luck

[Error404]

Here you go:

[UrS4boy]

Here you go:

How were you able to extract that pdf? Usually the stuff at Paul's website is bullet proof non-extractable.

[varia]

How were you able to extract that pdf? Usually the stuff at Paul's website is bullet proof non-extractable.

there is not a such a thing on the internet and its very simple
1., copy link address
or
2., open link in new window

[Error404]

Right click, Save as

[UrS4boy]

Right click, Save as

Nope

[UrS4boy]

there is not a such a thing on the internet and its very simple
1., copy link address or
2., open link in new window

No. 2 and then copy link address yields (as an example):

http://www.s2central.net/S2_Schematics/E/E20.PDF

Thanks.

[Error404]

Don't know what browser etc your are using, but right click, save as works fine for me

[UrS4boy]

Don't know what browser etc your are using, but right click, save as works fine for me

I'm using IE

[Error404]

Works fine in Chrome

[Deacs]

Thanks guys.

[rj scotty]

Note: if you have heated seats and want to add electrical adjustment seats you only need to run a fused live feed as you can pick the ground from the heated seat loom