diff lock lights

**rotoryboy** · 2 March 2005, 19:20

That's right matey. Remove it and pull it apart and the bulb needs to be de-soldered and a new one soldered (we all replace with an LED)

HTH

**Pete_RS2** · 2 March 2005, 19:34

You can prize out the switch from the top without removing the console by carefully using a craft knife around the edge.

**Jas11n** · 2 March 2005, 19:37

Originally posted by rotoryboy

That's right matey. Remove it and pull it apart and the bulb needs to be de-soldered and a new one soldered (we all replace with an LED)

HTH

Guess where I was off to when I crashed mine??? Maplins

for a handfull of LED's costing no-more than a quid

Still need to get some,,,but I daren't go there,,,bad luck and all that

**Jamie** · 3 March 2005, 08:48

thanks. as your all dealing with a total novice when it comes to even minor motor tinkering, do i go to any electric/diy shop and ask for LED's?

**mcandmar** · 3 March 2005, 11:00

I used these, cheap and easy.....

http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3874460351

NCTS!!!

Comment