Retrim headlining avant

[nip]

As I've stripped the old headlining material and also removed the old foam and glue I was wondering what had people used for retrimming again , I'm changing color but am unsure what thickness and where to buy from any help would be good cheers

[irishs2]

I used Black foam backed headliner fabric 5mm on ebay when doing mine. Also use the correct glue. I used 3M Super 90.

Mine:

http://www.s2forum.com/forum/showpost.php?p=795423&postcount=263

[Typ89]

I've redone mine in grey alcantara type fabric. You can buy it on Ebay with the foam backing already gluid on to it.
I can recommend buying some extra in the same colour but without the foam backing to trim the A,B and C pillars with.

[nip]

I used Black foam backed headliner fabric 5mm on ebay when doing mine. Also use the correct glue. I used 3M Super 90.

Mine:
http://www.s2forum.com/forum/showpos...&postcount=263

Looks fantastic Eric, I did look for it in your pm u sent but couldn't find Which one , I have found some 3mm foam backed material i wanted to make sure it wasn't too thick cheers

[nip]

I've redone mine in grey alcantara type fabric. You can buy it on Ebay with the foam backing already gluid on to it.
I can recommend buying some extra in the same colour but without the foam backing to trim the A,B and C pillars with.

I will do the same too for the a,b and c pillars cheers

[RS2junkie]

Hi,

I went thru replacing my headlining a while back and hit a problem with the glue not sticking, its important to keep the board clean and dry, check out the thread called "Headlining Adhesive Problem"

I used grey alcantara and did all the pillar trims. Its a time consuming job but its worth the effort.

Good luck.

PAUL

[irishs2]

Looks fantastic Eric, I did look for it in your pm u sent but couldn't find Which one , I have found some 3mm foam backed material i wanted to make sure it wasn't too thick cheers

I had a quick look on eBay and the seller doesn't sell it any more
Which ever material you get make sure its 4-way stretch material. Otherwise you could get wrinkles around the tight areas

[nip]

Hi,

I went thru replacing my headlining a while back and hit a problem with the glue not sticking, its important to keep the board clean and dry, check out the thread called "Headlining Adhesive Problem"

I used grey alcantara and did all the pillar trims. Its a time consuming job but its worth the effort.

Good luck.

PAUL

Cheers Paul I can get some good adhesive

[nip]

I had a quick look on eBay and the seller doesn't sell it any more
Which ever material you get make sure its 4-way stretch material. Otherwise you could get wrinkles around the tight areas

Cheers mate il have a look tonight