rs6 c5 seats

[s2dk]

hello

does anyone know if they fit in a s2 avant? im only after the front seats. i know the wirering wil have to be made, but what about the seat rails? can you swap in s2 seat rails on them like you can with the rs4 s4 b5 recaro?

regards chris

[Monkeymagic]

Seats

As far as. Know they are the same seat as B5 RS4. Big big and certainly heavy in a S2 maybe.

[s2dk]

Yah heavy Maybe bit Thats not a problem for me. I rather sit with comfort ��
Just dont know If they rails are the same and has the same fixing points

[Monkeymagic]

As I say as far as I know they are identical. My mate has a C5 RS6 and I have a B5 RS4 the seats look to be identical.

[s2dk]

Yah on top But What about the underside ?

[Giacomo]

I fitted S4 B5 in a A6 C4 months ago, just to see how they fit underside.
They're not plug and play but they can fit with an easy mod, you only need to weld a 2cm spacer on the left pin that slides in the rail. Right pin on the passenger side (I'm italian, so LHD).
The central rail with regulation and the tunnel pin slides in directly.

[s2dk]

okay think im gonna go with the s4 b5 in the s2 avant seats

[quattrostyle]

okay think im gonna go with the s4 b5 in the s2 avant seats

C4 seats have a wider track than B4 seats AFAIK so fitting B5 seats to a B4 might require more work than Giacomo described.

[s2dk]

i know the b5 should allmost be a direct swap

[quattrostyle]

That's cool then

[Giacomo]

yes, C4 track is wider, so you need a little mod. B4 is narrower than C4 and even if I didn't try to fit B5 seats in the RS2, I think it's direct swap.
If you search in the forum you should find somebody that has fitted rear B5 seats on a S2/80 limo too.